I have a 3'' exhaust on my gq 4.2td and was wonderig if a 3'' dump would make any difference to performance? How much are they and where would i get one for a garrett?
Cheers Den
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3 inch dump
3 inch dump
89 st wagon, 4.2 turbo, top mount intercooler, 3'' zaust, factory locker, 2'' bodylift, 4''lift, superior drop box's, 35'' mtz, custom bullbar, premier winch
hey mate my mate had a 3inch mandrel bent exhaust from the dump pipe back and it had 95kw at the wheels i was their when the 3 inch dump pipe was fitted and nothing else had changed it was about 2 hours after the 1st run on the dyno and he put out 105kw atw so it make s a fair bit of difference.
andrewholmes
Like more power or torque? hows fuel economy? I changed my inlet to a gu air box and im now getting 10ltrs/100ks instead of 13! drivin on the highway at 100 clicks.bogged wrote:got mine last week from Beaudesert in Qld.
VERY IMPRESSED....
Cheers Den
89 st wagon, 4.2 turbo, top mount intercooler, 3'' zaust, factory locker, 2'' bodylift, 4''lift, superior drop box's, 35'' mtz, custom bullbar, premier winch
Impressed in the quality of it.Den81 wrote:Like more power or torque? hows fuel economy? I changed my inlet to a gu air box and im now getting 10ltrs/100ks instead of 13! drivin on the highway at 100 clicks.bogged wrote:got mine last week from Beaudesert in Qld.
VERY IMPRESSED....
Cheers Den
That with the 3inch exhaust will increase power.. that with pump and boost work, look for AJ's thread with dyno sheets.
theres also another thread with dyno sheets from Andrew in Lilydale at the Diesel place.
Who is online
Users browsing this forum: No registered users and 1 guest