hello,
my 1.3 blew up, bought a 1.6 8 valve.
the 1.6 i bought was pretty much a block and inlet manifold, so there was alot of fucking around to get the new engine preped...
its all in now just put the 1.6 dizzy on last night...
my problem is... there is no spark, i have hooked everything up correct.. all the wires are where they should be. but still no spark, my dizzy works and my coil also works....
i have no idea what to do!!!
please help!!!
Dan!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 conversion- no spark please help
If there is spark at all, but no action, what Nic said about the dizzy.nicbeer wrote:Carb i am guessing? U getting fuel down there
also check the timing by hand, could be 180deg or worse out not getting it to spark.
Your cam rotates 2x crank speed.
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Who is online
Users browsing this forum: No registered users and 3 guests