Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Devastating gearbox problems

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Devastating gearbox problems

Post by Sammyboy »

Hi all,
I drive an NA Pajero with a 4D56 TD engine in it. My car is not necessarily a bad car, but I seem to be going through gearboxes like there is no tomorrow. I am coming up to the time when I will be replacing the 4th gearbox in 4 years... I don't want to sell my car but it may be the only option :cry: What do I have to do to prolong the life of my gearboxes? I have been reading other forum entries on other Mitsubishi gearboxes lasting 150-200,000K but mine seldom last more than 2 years :? :? So what is it that I am doing wrong? I am constantly checking my fuel economy figures so it's not like I drive to fast or anything and I maintain my car every 10,000k. Do I sell it and loose thousands and thousands of dollars or do I try to fix it again... :?: :?: Is there any other (eg later model gearboxes) boxes that will be more reliable, is there anything else I should know? Where is the best place to take my car in Melbourne? Thanks in advance, Sam
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Look into putting a gen2 box in onto your transfer, they are far stronger.
They don't quite bolt straight up but a good garage could work it out.
I have done the reverse, a gen1 t/f on my gen2 box.
If you are going to continue to run old poop you need to learn how to carry out some of these repairs yourself. Maybe a night course in car maintainance or similar. Otherwise it could be cheaper to just buy a much newer vehicle with increased strength and reliability.
J Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Are you going through second hand boxes or reconditioned ones. If you keep replacing them with second hand units then maybe its time to go re-co.
User avatar
mki
Posts: 9
Joined: Sat Dec 16, 2006 7:44 pm
Location: Finland

Post by mki »

The V5MT1 tranmission box fit's straight behind the 4D56 engine, because Gen2 NH Paje has that setup originaly.... one reason that older paje transmissions popup, driving under 2250 rpm's with the 5th gear, or towing heavy loads with the 5th gear. Also the gearbox used in the NA pajero are originaly from a gen 3/4 Sigma/Eterna/Galant..... using a 2 wheeldrive box in a 4by4.... :cry:
- Power is nothing without traction -
- Pajero 4x4 2.5TDIC + Aurora RT02 33x12,5-15 -
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Do you rest your hand on the gear lever while driving ?
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Post by Sammyboy »

I dont really rest my hand on the gear lever, but I guess I just had abad run with gearboxes. I just bought the final phase 1 NG Paj, which cant drive because of it's engine (or lack of) so I guess I have to sort out some other issues now. Anybody assistance would be much apprieciated. Thank you
;) ;)
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests