Hi guys... got the old standard sealed beam units on the front of my hilux ute... wanted to convert them to H4s.... i see some H4 conversion kits on ebay for around ~$100... but was wondering is it hard to convert some H4s out of something else and bolt on the front? If not then H4s from what exactly? I think the rectangular lights out of the old TD cortinas were H4s? would they convert ok? anyone else done this?
Cheers
muttsa
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
H4s on a 88 Hilux?
Moderators: toaddog, Elmo, DUDELUX
I have used cheap H4's (the $20 ones) and expensive cibie units .. I will take the cibie any day, they last longer and give a much better spread of light, and the glass seems to be so much tougher ..
Also look at upgrading your loom to you headlights, even the old sealed beams with 13 volts getting to em are very very acceptable, and dont fill up with water during the deeper crossings.
Also look at upgrading your loom to you headlights, even the old sealed beams with 13 volts getting to em are very very acceptable, and dont fill up with water during the deeper crossings.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 51 guests