hey guys
first off do 40# diff centres fit into 60# diffs? also are they the same strength?
i will be running a 350 with the stock 4 speed box, what gear ratio do you recommend for running that set up with 35 or 36" tires? im guessing about a 4.88 ratio!
thanks mitch
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 and 60 series questions
Moderators: toaddog, Elmo, DUDELUX
Im here for the sausage!
Mate you would probaly be better off with a crawler gear set. in high range you will be fine, my 2F pushes 35s heaps easily.
you wouldnt want to reduce your top end cos is revving too hard would you??
so a set which just reduces low range be good for you.
and yeah those centres interchange
you wouldnt want to reduce your top end cos is revving too hard would you??
so a set which just reduces low range be good for you.
and yeah those centres interchange
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Who is online
Users browsing this forum: Google [Bot] and 0 guests