Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
F and R diff centers?
F and R diff centers?
Ive never really played and dealt with diff centres before. Should they be and look the same front and rear? its a widetrack 93 sierra.
Chop
Chop
I THINK ICAN, I THINK I CAN!
Yes they are different post about 85. Before this the front and read were Identical. Post 85-ish the front has only 2 sungears, and the carrier is more open. You cant use these with lockrights, but you can fit another rear center to the front. You just need to change the sidegears and possibly the shim washers as the front takes a smaller axle.
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Yep, the side gears mesh with the sides of the lockright.
This is what I have done. Both diffs use lockrights that are the same part number. No such thing as front or rear ... well for a zook anyway.
Swap the side gears left to right inside the centers so the more fresh side of the sidegear drives the lockright center.
Its only the side gears which are different because the front axle is smaller in diameter and has different number of splines.
This is what I have done. Both diffs use lockrights that are the same part number. No such thing as front or rear ... well for a zook anyway.
Swap the side gears left to right inside the centers so the more fresh side of the sidegear drives the lockright center.
Its only the side gears which are different because the front axle is smaller in diameter and has different number of splines.
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
thanks Juju, i thought that was the case(same front and rear) just checked coz they looked different once pulled out.
I'm actually getting a diff guy around the corner to install them and set backlash and do the seals for me.
I will mention the swapping the side gears, he may do that anyway.
Thanks
Chop
I'm actually getting a diff guy around the corner to install them and set backlash and do the seals for me.
I will mention the swapping the side gears, he may do that anyway.
Thanks
Chop
I THINK ICAN, I THINK I CAN!
Who is online
Users browsing this forum: No registered users and 2 guests