Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Examples Of Custom Barwork Software

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Examples Of Custom Barwork Software

Post by =SKB= »

Have seen a few examples of trays and barwork in some of the threads that have been done with software. Just wondering what some of you guys use. Mainly the 3D kind of stuff, though anything that can have dimensions added and allow for shape or style alterations to be made relatively simply.

Thanks :D
Top
Posts: 49
Joined: Sun May 07, 2006 7:40 pm
Location: Hurstbridge, Melbourne

Post by dogeatdog01 »

I use Solidworks 3D at work to design sheetmetal/non sheetmetal parts and assemblies.
Pretty easy for a novice to use in my opinion.
Planning on designing my tube side steps soon on Solidworks
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

dogeatdog01 wrote:I use Solidworks 3D at work to design sheetmetal/non sheetmetal parts and assemblies.
Pretty easy for a novice to use in my opinion.
Planning on designing my tube side steps soon on Solidworks
Thanks Mate.

I will have a look for it.
Top
Posts: 322
Joined: Fri May 21, 2004 12:10 am

Post by Steve F »

Yep, solidworks, takes a little while to get the hang of it when you don't do it for a living but it's probably one of the easiest.

Cheers
Steve
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Steve F wrote:Yep, solidworks, takes a little while to get the hang of it when you don't do it for a living but it's probably one of the easiest.

Cheers
Steve
Thanks for the reply. Hopefully I can figure it out. :D
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

=SKB= wrote:
Hopefully I can figure it out. :D
I think i had an educational version of solidworks which had a few really good tutorials.
Tetanus rolling on 37's
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Steve F wrote:Yep, solidworks, takes a little while to get the hang of it when you don't do it for a living but it's probably one of the easiest.

Cheers
Steve
Has to be easier than AutoCAD, I'm used to using 3D studio max but AutoCAD start up screen had me stuffed straight up.
Top
Posts: 180
Joined: Sun Apr 20, 2003 11:24 am
Location: Brisbane,Australia

Contact:
Contact Rod Dirt'e

Post by Rod Dirt'e »

Try bend tech software

http://www.pro-tools.com/bendtech.htm
DIRT MOTORSPORTS
Haultech Off Road
Mickey Thompson Tyres
Wizard Performance
Fourbys
Tyreworks
Racer Imports
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

chalk lines on concrete????
www.bolsys.com.au

the original and the best
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

dogbreath_48 wrote:
=SKB= wrote:
Hopefully I can figure it out. :D
I think i had an educational version of solidworks which had a few really good tutorials.
x2
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests