Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bellhousing for LR 101/LT 95/ Defender

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 9
Joined: Wed Jan 10, 2007 7:22 am
Location: Sweden

Bellhousing for LR 101/LT 95/ Defender

Post by samofsweden »

Hi! Anyone has a bellhousing from a LR 101 (1983/84 V8/LT 95 4 speed)? I need this to get my rear propshaft longer. And dont want to move the engine. Thanks, /Sam
www.fotografsam.se
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

There are very few 101's here so best bet is the UK.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 9
Joined: Wed Jan 10, 2007 7:22 am
Location: Sweden

Post by samofsweden »

Had some luck today! Found a company who said that they might can get hold of the behousing along with the primary pinion! Thanks for reply/Sam
www.fotografsam.se
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

they can be made out of a standard one.
Top
Posts: 9
Joined: Wed Jan 10, 2007 7:22 am
Location: Sweden

Post by samofsweden »

andrew e wrote:they can be made out of a standard one.
Yes your right! Can all so be made out of a solid piece of aluminium, depends what you want to spend your time on... ;) Thanks/Sam
www.fotografsam.se
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest