Just use a catch on the tunnel to lock the lever forward in the unlocked position. That would do it easy.
It does have detents and they are firmish, but the lever position will kind of default to locked, especially with lots of vibration and if it's sitting with the nose high.
Mine still works a treat. I've had it apart once earlier this year and gave it a clean, but it's 99% transparent on road.
My slot for the lever is a little short and after lots of highway km's the lever moves back a little and touches the tunnel, making a little but if noise. It would take 5 minutes to fix but I keep forgetting.
Steve.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Trail Tough Disconnect
very possible. I'll post pics when im finished. (few weeks i think).ofr57 wrote:i was thinking on running one of these but on a solenoid like rhetts disconnect ... possible?
theres a thread on pirate too, same unit but on a toy case, and its hooked up using an air toggle switch instead of solenoid. i'll try and find you a link.
EDIT:
http://www.pirate4x4.com/forum/showthre ... air+toggle
All the gear, No idea...
Who is online
Users browsing this forum: No registered users and 30 guests