Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Who`s running radial claws?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

Like all luggy and aggressive tyres, they do have the potential to become noisy.
If you rotate them regularly (I reckon every 5000kms) you keep any uneven, noise producing wear patterns out of the tyre.
Follow this up with regular wheel alignments and they will stay as quiet as the day that they went on.
Due to their two stage shoulder lug there is a good chance at a certain speed you may feel the lugs as they rotate (Usually as you slow down), but this all depends on the vehicle, the tyre size, the pressures and the load being carried. I've driven a TJ Jeep with 33x12.50R15 Radial Claws and it drives better with these on it than an AT. :armsup:
Don't confuse the bias with the radial construction. Bias Claws due to their construction and with their much larger Sidebiter lugs are going to be noisier.
Go the Claws!!!! :D :twisted:
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

alki wrote:is this the tyre we are talking about?
Image

If yes than they are as loud as they come


Thats the bias claw .. not the radial.

Even the bias claw was not all that noisy ( well not under a zook anyway)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 82
Joined: Wed Sep 22, 2004 5:14 pm
Location: newcastle

Post by bowser »

can someone post up pics of the tyres we are talking about?
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

Bias is definitely noisy as hell, also wears really quick on the roads. I've got a set of 35x13.5x15 Bias Baja Claws as my offroad set, they are rated at 10% road and 90% offroad

Also running Bias full time on your vehicle doesn't do wonders for your fuel ecomony ;)

This is why i've reverted back to my old BFG muddies as road tyres
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 130
Joined: Wed Nov 10, 2004 1:40 pm
Location: Ipswich, QLD

Post by SilverGQ »

Ive had a set of 35x12.5R15 radials on my shorty for about the last 12 months. They are showing a little wear, a few largish chunks taken out of them, probably due to the fact that i dont reduce pressures and i tend punish them a bit.

On bitumen i am very happy with them. great in the wet/dry all conditions. Can be a little noiseyn but you get used to it and just turns into background noise after a while. Tend to make a grinding sort of sound when under braking, have had people in the car ask me if thats my brakes grinding but i tell them its my tyres.

On hard packed dirt roads the can be bit skittish tending to skip/skate sideway on dirt corners, although this could probably be stopped if the pressures were reduced.
I paid $300 fitted for mine, which was the cheapest i found.

Heres a coupla pics of em on my truck:
Image
Image

Hope i helped a little.
GQ Shorty 4" susp, 2" bod, TD42T, 3" zaust, 35 Radial Claws/36 IROKS, Lockers, BARKODE barwork
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

Old mate confused between bias and radial. have a look at all the mickey thompson advertisements. they always show the radial for some reason. have a look straight vertically down the tyre. you will see the tread on the left and right side obviously. you will see a little groove running down the centre of the tyre. if the groove is dead straight it is bias. if it is offset and on different sides on each tread block it is radial. same pattern pretty much. just bias is more meaty on top and down sidewalls. I got 35#12.5#15 radials. Kj offroad centre and lewis tyre service in geelong sell em both for $285 bucks. Not fitted though i dont think. Radials awesome everywhere, but my mate still beats me in soft stuff with his jungle trekkers. but also when i get home i sit back and watch him change his tyres back to at's while i sip on a rum can.
Posts: 250
Joined: Sat Sep 20, 2003 1:01 am
Location: sydney

Post by alki »

this is the tyre that my brother in law runs as offroad tyre
Image

It is lot noisier than AT and even MT.
I haven't heard any other tyre that noisy.
BTW,personaly I don't mind tyre noise

BIL is very happy with those tyres.Very good handling on wet or dry bitumen,good on rocks and excelent in mud
GU III,3.0 di
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Post by GUJohnno »

SilverGQ wrote:... a few largish chunks taken out of them, probably due to the fact that i dont reduce pressures and i tend punish them a bit. ...


Why would you not lower your pressures...?
Not only are you punnishing your tyres but you are doing damage to the tracks.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

For old mate confused. picture above are of radials. ave a look the line is offcentre. Radials loudest tyres? you havn't been for a run in a 4wd with simexes yet?....
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

radial claws are shit!

by my 35 wrangler mtrs and then ill by a set of radial claws!

Sold
:lol: :lol: :lol: :lol: :lol: :lol:
Bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 250
Joined: Sat Sep 20, 2003 1:01 am
Location: sydney

Post by alki »

OK,I might be confused about radial and bias,and haven't driven on simex's,but saying that claws are as quiet as AT is lot of bull....
GU III,3.0 di
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

lets keep this simple

bias = very noisy and hate road work
radial = moderate noise as expected with a muddy but better than you would expect and wear reasnobly well on road.


if you want a decent tyre for offroad and on and dont do a huge amt of k's claw radial, if you want to run a nimbus tyre get an alterrain - if you want ahappy medium but closer to claw's buy my mtrss

bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

Alki= dont know aboutr AT's? Never bought em and never will. but i dont at all reckon they would be anywhere near as loud as radials

Bingham= mate sorry but why did you spend hard earned cash on gay MTR's in the first place.
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

Bingham= mate sorry but why did you spend hard earned cash on gay MTR's in the first place.[/quote]

had 33's upgraded as didnt want to be outdone by mates and of course sold 33's on ol then needed some tires stat!!!!!!!!

no claws available :oops: so bought mtrs which work well any time except when extremely wet as found out at mud bulls!!!!!!

sad but true,,,,,ahhhhhhhhh
2015 200 Series Gx TTD - ................ Fark 3L's -
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests