Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone done sill chop on gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Do u run 3 slider mounts as pictured or is there a 4th one at the back?

If there is a 4th one where do u mount it???

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 71
Joined: Mon Jan 16, 2006 6:51 pm
Location: Chch-NZ

Post by Clarkie »

Screwy wrote:Do u run 3 slider mounts as pictured or is there a 4th one at the back?

If there is a 4th one where do u mount it???

screwy
4 mounts

Image
Safari LWB Hi-roof whale,TD42 with DIY turbo,4" lift,35" BFG's,factory locker + winch.
Needs Jenny Craig...
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

i thought welding to the chassis was a no no?
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 71
Joined: Mon Jan 16, 2006 6:51 pm
Location: Chch-NZ

Post by Clarkie »

vehicle has full cert(inc sill cut,sliders,lift,drop boxs,lenghtened susp arms/panhards etc)I spoke to engineer before fitting sliders.

Could be different in Oz though

Chassis is made of 2 sections welded togeather from factory,(not the best welding either)

Cheers Shane
Safari LWB Hi-roof whale,TD42 with DIY turbo,4" lift,35" BFG's,factory locker + winch.
Needs Jenny Craig...
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

welding to chassis is alright but shouldn't rally be done lIke above. should use a diamond shape plate so there's no vertical welds as they creat stress fractures and can crack
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

familybus wrote:i thought welding to the chassis was a no no?
in queensland it is a no no i cant say for the other states but i would assume they are the same .... u can try and get it certified here but unless you got big bucks to have your chassis x rayed etc u will need to bolt it on as for the one you see it is in new zealand and i have no idea about their rules

cheers
Heath
--Zer0--
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

zer0 wrote:
familybus wrote:i thought welding to the chassis was a no no?
in queensland it is a no no i cant say for the other states but i would assume they are the same .... u can try and get it certified here but unless you got big bucks to have your chassis x rayed etc u will need to bolt it on as for the one you see it is in new zealand and i have no idea about their rules

cheers
Heath
--Zer0--
its ok to weld to a chassis in NSW and VIC.

QLD is anal with engineering....

Rememeber, you can SOA and have large lift in VIC and NSW. You cant in QLD.....

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 257
Joined: Fri Jun 20, 2008 4:00 pm
Location: Far North QLD

Re: Anyone done sill chop on gq

Post by steve patrol »

Anyone done this in qld?

Cheers

Steve
Top
Posts: 30
Joined: Sun Mar 14, 2010 9:41 pm
Location: Central Queensland

Re: Anyone done sill chop on gq

Post by AllTorqueGQ »

A few boys up here in Queensland are cutting the sill slightly higher and replacing the whole sill with a piece of 100x50x3-5mm box section and not running sliders
Top
Posts: 257
Joined: Fri Jun 20, 2008 4:00 pm
Location: Far North QLD

Re: Anyone done sill chop on gq

Post by steve patrol »

Sweet. I ended up using 6mm plate. But cut it slightly higher like you are talking about. 4mm gap under the door to the plate right through...
Cheers for the help
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 82 guests