Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ORBIT EYES

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Looking at the second pic, at how close the spring eye is to the chassis, do you get much up travel before it hits?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.3

on the ramp. should go a bit better yet as the left hand tyre is jammed against the inner guard (need wheel spacers or something)
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

good flex !!!! :lol:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

moose wrote:good flex !!!! :lol:


Wish mine flexed that well :cry:

Hey Moose you want to do a spring over on mine!!! :twisted:
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

MKPatrolGuy wrote:Looking at the second pic, at how close the spring eye is to the chassis, do you get much up travel before it hits?


It just touches but as the spring flexes up it pulls the hanger forward again.
I will put a slightly longer hanger on it as soon as i get more time :?
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.4
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.5
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I am very jealous
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.6
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

MKPatrolGuy wrote:I am very jealous


dont be Dave !!!
just cause my Zook out ramps your POS !!!!!! :finger: :finger: :finger:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.7
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.8
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

No.9
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

Last one
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

moose wrote:
MKPatrolGuy wrote:I am very jealous


dont be Dave !!!
just cause my Zook out ramps your POS !!!!!! :finger: :finger: :finger:


AHHH Bit Me!! :finger: :finger:
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

how much extra flex you think you got, looks good for this style patrol can remember a mated that was set up similar (without spring joints) and it flexed crap.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

yes i wood b interested 2 know how much extra flex u gained or dus it give the same flex but wth less binding :?:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

nice flex

but how much of that is down to a nice custom leaf pack and how much is due to the orbit eyes

its cool though

how does it street?
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

I would say even with the tyres hitting the inner guards it has gained about 2'' up travel and about 4" down travel.Should be a bit better with some wheel spacing.
Took it for a drive today and it is pretty much the same as what it was before,maybe a small amount more body roll but nothing major.
Hopefully will take it for a wheel this week-end and see how it feels on the track.
Top
Posts: 361
Joined: Wed Dec 04, 2002 3:47 pm
Location: Perth , WA

Contact:
Contact Andy

yep

Post by Andy »

I was thinking of putting some ( Johnny joints ) on the Feroza , but was thinking of putting them on the front hanger and keep the Revolver on the rear , it's good to see ShortyMQ has tried them and has done all the hard R & D to see if they actually work :lol: :lol: :lol:
Andy...........

All post's are submitted with the assistance of alcohol

"OUR FEROZA" is Debt Propelled
Top
Posts: 373
Joined: Mon Oct 28, 2002 12:37 am
Location: Toowoomba

Contact:
Contact toymad

Post by toymad »

Shorty MQ is also making a set of 60" springs to suit the orbit eyes for my hilux. Hope to have them in for easter at the Manar! :D :D :D :D
The ORIGINAL[color=yellow]Team Rocksolid[/color]
TRD....TOYOTA ROCKCRAWLING DEVELOPMENT
SUPERIOR SPRINGWORKS Toowoomba
EFS Suspension
Garry Stevens SIGNS
http://www.myspace.com/toymad
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Just wondering, how do the orbit eyes actually stay in the springs?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

MKPatrolGuy wrote:Just wondering, how do the orbit eyes actually stay in the springs?


I rolled the spring eyes a bit tighter than the size of the orbit eye so they are a press fit.I also put a small tack weld on just to be sure.I took it for a quick play on sunday and everything is working well :D
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Congrats, sounds like it turned out 8)
Gone drag racing......
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

What sort off benefit/advantage would you get if the springs were standard or off the shelf items? If more flex, any ideas on how much?(on average)
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

Stepho wrote:What sort off benefit/advantage would you get if the springs were standard or off the shelf items? If more flex, any ideas on how much?(on average)


The smallest bollock joint is 50mm dia so it wouldn't actually fit any standard springs.But if they did i beleive they definately would increase flex to a certain amount.
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Thanks :)
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

how big r the joints u r using ??
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

hypolux wrote:how big r the joints u r using ??


I'm using the 50mm o.d joints.
Top
Posts: 58
Joined: Wed Mar 19, 2003 7:38 pm
Location: Strathpine

Post by realux »

Richard at 4x4 engineering Acacia Ridge in brisbane is using them on a hilux fitted to the fixed eye of the rear springs combined with superior 4wd shackles they leave no strain on the spring whatsoever.
Richard is using a smaller type purchased from bigballs offroad.
There is a bigger unit on the market approx 70 mm od available from calbah engineering. There is a set of these fitted to a 75 series cruiser with Superior 4wd shackles and the articulation is awesome.This is combined with a ladder bar and so far no signs of spring strain or flattening.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest