Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

feed back on tyres

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

which would you choose for best traction, wear life and noise?


-BFG M/T
23
61%
-Cooper S/T
8
21%
-Cooper S/TT
5
13%
-Bridgestone Dueler M/T
2
5%
 
Total votes: 38

Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Post by Utemad »

NJ SWB wrote:I mentioned in an earlier post that I had a look at some 33x12.5 MT/Rs earlier this week, and the pattern is different to the 285/75 I've got. The blocks on the outer edge look longer (i.e. wider across the tread face) which may increase their effectiveness as "paddles" in loose stuff.

So - I just measured mine, and the longest outside block is about 70mm long. Anybody with other sizes care to measure theirs?
Scott


I've got 31in MT/Rs with about 500kms on them. I just measured where the outer tread block begins down the sidewall to the top section of the lug. Not the highest part of the lug but where its lower edge is where it then curves up and over the tyre.

If that's the measurement you're talking about then mine measure 73mm.
Land Rover Discovery series 1 V8
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

MereMale wrote:
Hoonz wrote:also .. what i did when i got them was fitted them to the car and let them down to 5psi and drove on them for 30mins ... up and down the road
BECAREFUL WHEN TURNING!


Why :?: :?: :?:

to heat them up and soften the rubber..
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

it gets the rubber flexed up and ply able stretches it and all sorts of stuff
as any of the townsville guys and they will vouch for it as my tyres bag awesome
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Utemad wrote:
NJ SWB wrote:I mentioned in an earlier post that I had a look at some 33x12.5 MT/Rs earlier this week, and the pattern is different to the 285/75 I've got. The blocks on the outer edge look longer (i.e. wider across the tread face) which may increase their effectiveness as "paddles" in loose stuff.

So - I just measured mine, and the longest outside block is about 70mm long. Anybody with other sizes care to measure theirs?
Scott


I've got 31in MT/Rs with about 500kms on them. I just measured where the outer tread block begins down the sidewall to the top section of the lug. Not the highest part of the lug but where its lower edge is where it then curves up and over the tyre.

If that's the measurement you're talking about then mine measure 73mm.


Thanks Utemad - sounds like the bit I was measuring. Anybody else?

Scott
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Thanks for that Bogged and Hoonz
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

tyres

Post by Toy80Diesel »

Go the MTR's!!!!

as said in a previous message, bang for your buck..

I've got heaps of km's out of them on my 80.

little noisy on road as they get more worn down but still not as much as muds.

And good on road traction for day to day use.
Shut Up, Get Out, & Start Digging...
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

radial claws have come down in price heaps. should fit your budget.
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests