Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CIG lockers

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

which would you go for in a 1lt tintop?


Open front / locked rear
48
72%
Locked front / open rear
19
28%
 
Total votes: 67

Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

zookwithdreams wrote:I have almost decided to weld the front in my coily after this topic but want to have a spare as a back up. Does any one have one laying around that they want to sell or can anyone tell me if these centres are the same as the nt 's or can ppl tell me what i should be paying for one
I doubt you will be able to find a welded coily front diff. no they are not the same as a narrow track diff and I doubt if they are interchangeable. you may be able to fit a jimny front diff with some small modifications.
[url]http://www.vic.suzuki4wd.com/forum[/url]
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i have coily diffs

you can have the front centre for 300 and ill even weld it

comes with free housind rotors calipers(compleat front diff) :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 100
Joined: Wed Jun 02, 2004 7:21 pm

Post by Toj0 »

muppet_man67 wrote:
zookwithdreams wrote:I have almost decided to weld the front in my coily after this topic but want to have a spare as a back up. Does any one have one laying around that they want to sell or can anyone tell me if these centres are the same as the nt 's or can ppl tell me what i should be paying for one
I doubt you will be able to find a welded coily front diff. no they are not the same as a narrow track diff and I doubt if they are interchangeable. you may be able to fit a jimny front diff with some small modifications.
Any suzuki wrecker will have them. As they're not that common a car there are usually a few around. I have one already welded but it's up here in Brisbane.
Tojo
96 coily with bits to replace the bits I knocked off
Posts: 49
Joined: Mon Dec 20, 2004 7:29 pm

Post by ryna »

now can anyone post up a nice and easy, step by step instruction on exactly how to weld the diff, which bits to weld etc, and make it real clear, cos i have a friend who can weld but knows nothing about cars ;)
0 - 100 in 30 mins
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

would only weld a rear, after riding in a zook with both welded, in competition style events, u loose the ability to turn and therefore keep hitting buntings and having to back and fill etc.

arb air front, rear welded. ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

ryna wrote:now can anyone post up a nice and easy, step by step instruction on exactly how to weld the diff, which bits to weld etc, and make it real clear, cos i have a friend who can weld but knows nothing about cars ;)
thats another thread in itself everyone has different ideas on what way is best , do a search it's ask (welding diffs ) about every 2 weeks , look in both the suzuki section and the general tech i think .

why do you wanna carry a spare diff around with you ? weld it properly and it won't break .

and what screwy said is true , i know i had dramas with turning in the nissan trials but rather be running with two locked diffs and hard steering in a comp than no locker in the front at all , weld them both and save up for power steering or the like .

cheers Jai
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Screwy_ScrewBall wrote:would only weld a rear, after riding in a zook with both welded, in competition style events, u loose the ability to turn and therefore keep hitting buntings and having to back and fill etc.

arb air front, rear welded. ;)
100% correct
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

Screwy_ScrewBall wrote:would only weld a rear, after riding in a zook with both welded, in competition style events, u loose the ability to turn and therefore keep hitting buntings and having to back and fill etc.

arb air front, rear welded. ;)
welded is awesum :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

RB zook wrote:welded is awesum :D
Air locker is awsum,
welded is how you make do while you are saving for an Air locker :armsup:
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

droopypete wrote:
RB zook wrote:welded is awesum :D
Air locker is awsum,
welded is how you make do while you are saving for an Air locker :armsup:
Peter.
homer voice mmmm air lockers.

was good when had the airlocker :?
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

i would go the air locker in the rear, and lock the front.
fitting a steering dampener should help with cornering, i plan to do this when i got the cash for my 98 sierra :D
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

ure going to only weld one and leave the other open just lock both or get some lockrights there only about 300 each
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Ridge wrote:i would go the air locker in the rear, and lock the front.
fitting a steering dampener should help with cornering, i plan to do this when i got the cash for my 98 sierra :D

How will a steering dampener help :? It may help reduce the kick back when you let the wheel go under bound up conditions, but not by much at all, and you shouldnt be letting go of the wheel at all. As for the stiff steering with a front locker engaged, the dampener will do nothing for this at all.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Ridge wrote:i would go the air locker in the rear, and lock the front.
fitting a steering dampener should help with cornering, i plan to do this when i got the cash for my 98 sierra :D
Holy gravedig batman ...
A steering damper will do nothing for your steering ... apart from protect you from a little kickback.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

Haha talk about 4 yours old...... :cool:
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests