Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
7" LIFT DEATH WOBBLES
Shakes
There are a lot of thing that can make the wobbles, Tie rod ends, panard rod bushers[ also check that the nut on the front panard rod is still tinghtas it do loosen on full tilt in big lifts] and the shims under the swivel hub bearings
Temporary Australian
i fixed a bad wobble in mine by re-adjusting the panhards. All i did was park it on flat level ground and removed the panhards at the adjustment ends. I adjusted them so that they slipped onto the mounts easily, and it has a small shake at 65kph and dissapears as quick as it arrives. drives a heap better now, and i have 6" springs
There is no "I" in Team, but there are 5 in Individual Brilliance
Who is online
Users browsing this forum: No registered users and 149 guests