Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ PATROL Engine prob RB30

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

NutterGQ wrote:Hey since where handing out stupid advice why don't you go shave your balls with a steak knife?
stupid to some, sensible to others.
if he wanted something slower than his rb30
but runs without problems...

YMMV
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

bogged wrote:
NutterGQ wrote:Hey since where handing out stupid advice why don't you go shave your balls with a steak knife?
stupid to some, sensible to others.
if he wanted something slower than his rb30
but runs without problems...

YMMV

You like him are too thick to understand this was a thread asking how to fix a problem not how to spend a few grand swapping it to a disiel, if you noticed in the other thread where the guy asks about swaps I didn't comment on the stupidity.

With that said after 2.5 years with over 200rwkw and the biggest abuse imaginable I haven't broken a single engine part...so your reliability claims may be a bit misleading.

Oh and 430,000 kays now on all original bottom end, no rings, no bearings no pistons etc too many of you don't believe there's anything better than what you own, I'm not scared to tell you your pullin yourselves, and I won't bother replying after this or we just end up with another thread of opinions and no facts as per usual.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 15
Joined: Wed Feb 06, 2008 1:25 pm
Location: Tassie

Post by denso180 »

Hey Nutter,

It's petrol. im leaning more towards fuel myself...Theory I have is that the fuel pump is breaking down when it gets hot causing the power loss due to fuel pressure. now when i pull over and let it sit, the cold fuel cools the fuel pump down enough for it to work correctly again...... Does this sound feasible?? As i said before, I know its not the carby itself as that has had a full rebuild...

Its a real pain in the ass when your on a beach and have to go up a big dune to get home :P


Cheers


Dion

EDIT: sorry guys, i know I dont run the forum, and im asking for help, but everyones opinion is helpful.... except for the td42 lol ---> to slow ;)
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Yeah being non lpg it sounds like pressure dropping off could very easily be the problem, but wether you just change the pump and hope or install a cheap pressure gauge is up to you (speco fuel pressure gauge under 30 dollars)
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 15
Joined: Wed Feb 06, 2008 1:25 pm
Location: Tassie

Post by denso180 »

Yeah i might try the gauge first. Got a different question for you though, I got some wheel bearings for the front of mine the other day, just wondering if the bearings are the same across all GQ's or would mine be different cause it's the RB30 model...


Cheers


Dion
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Bearings are the same, from memory even the late 4.2s with bigger rotors used same part no, only real driveline difference on the RB30 drivlines is diff flange size on the front is smaller, otherwise near identical cars
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

NutterGQ wrote:With that said after 2.5 years with over 200rwkw and the biggest abuse imaginable I haven't broken a single engine part...so your reliability claims may be a bit misleading..
As misleading as your AWESOME UNSTOPPABLE POWER claims?
"
NutterGQ wrote:mine on 35s couldn't do more than 80 up a relativley steep hill when loaded, and that was in 3rd gear flat to the floor!
"

AWESOME!!! Cant understand why Nissan doesnt go back to them :roll:
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Post by B.D.R »

I'll go out on a limb here, and say it was BEFORE the Turbo was fitted :D
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

B.D.R wrote:I'll go out on a limb here, and say it was BEFORE the Turbo was fitted :D
same could be said about dozens of engines pre then post turbo :lol: :lol: :lol: :lol:
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

The RB30 turbo is a legendary motor, I wouldn't be wasting money swapping engines. Bolt a decent garret roller turbo, a front mount intercooler, fuel system and ecu and it will absoluetly fly.
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

bogged wrote:
NutterGQ wrote:With that said after 2.5 years with over 200rwkw and the biggest abuse imaginable I haven't broken a single engine part...so your reliability claims may be a bit misleading..
As misleading as your AWESOME UNSTOPPABLE POWER claims?
"
NutterGQ wrote:mine on 35s couldn't do more than 80 up a relativley steep hill when loaded, and that was in 3rd gear flat to the floor!
"

AWESOME!!! Cant understand why Nissan doesnt go back to them :roll:

Look I know you think your special on the forums but here's the breaking news champ your not, your insulting and attempting to degrade people although entertaining to you makes me sleepy, the not being able to do 80 comment was nearly 3 years ago you dipshlt, if you doubt my figures why not read mY turbo thread or go to youtube and see it yourself....don't try and make me look like a liar, I to can go through every thread you reply in and quote the bits in other threads to make you look like the asshat you are, now go eat a dik and leave this thread for those who can help.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

NutterGQ wrote:
bogged wrote:
NutterGQ wrote:With that said after 2.5 years with over 200rwkw and the biggest abuse imaginable I haven't broken a single engine part...so your reliability claims may be a bit misleading..
As misleading as your AWESOME UNSTOPPABLE POWER claims?
"
NutterGQ wrote:mine on 35s couldn't do more than 80 up a relativley steep hill when loaded, and that was in 3rd gear flat to the floor!
"

AWESOME!!! Cant understand why Nissan doesnt go back to them :roll:

Look I know you think your special on the forums but here's the breaking news champ your not, your insulting and attempting to degrade people although entertaining to you makes me sleepy, the not being able to do 80 comment was nearly 3 years ago you dipshlt, if you doubt my figures why not read mY turbo thread or go to youtube and see it yourself....don't try and make me look like a liar, I to can go through every thread you reply in and quote the bits in other threads to make you look like the asshat you are, now go eat a dik and leave this thread for those who can help.
:armsup:

:armsup: :armsup: :armsup: :armsup: :armsup: :armsup: :armsup:

there are some out there who think the 4.2 diesels are gods gift to cars, and if you have anything else your a monkey. although the 4.2 diesels are a great motor doesnt mean everybody should have one.

i just purchased a RB30 and was a bit reluctant at first, but was the best move i have ever made. only paying $1000 for an immaculate 188000km car and can fuel inject it and turbo it for another thousand. there was no way in hell i could justify spending nearly 8000 - 10000 for a turbo diesel for my use (an everyday vehicle). the Rb30s are a lot more at home on the road and a lot nicer to drive, if something is too go wrong with the motor, parts are so cheap for them and a whole engine is bugger all compared to $6000 for a replacement diesel motor.

sometimes i think they have to go on about the diesels just to reassure themselves its worth it. the money i have saved, might get meself a tinny
Posts: 15
Joined: Wed Feb 06, 2008 1:25 pm
Location: Tassie

Post by denso180 »

hmmm another question for ya's, how would the ol rb30 go pushing 35's?? anyone got any experiance with a standard rb30 and 3s's?? just out of interest :D
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

yeah i ran 100% stock RB30 with 35's for the first 6 months I owned it, around town its not that bad, on the highway at higher speed it sucks and in the bush in low range for most stuff its okay again, will struggle on low speed rocky stuff, also in deep slush you wont be turning the tyres over very quickly to clear them...

Check the video below for turbo diesel vs RB30 Stock vs Turboed all on 35's.

http://www.youtube.com/watch?v=f6YtD0nBTYY
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 15
Joined: Wed Feb 06, 2008 1:25 pm
Location: Tassie

Post by denso180 »

hmmm not really worth it then :( ok, another annoying question for the king of RB30 ;) My alternator has pretty much packed it in and im having trouble finding out what the replacment for it would be.... any idea's? I can get a new one at cost price, just need to know which alt it is lol. It doesn't list it in the books :(


Cheers again
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

i do have the model number written somewhere and can find it if you need but its a waste of time, got a 120 amp AU falcon alty and be done with it, 65 amp just isn't enough.
My bitch has boost, Nutter Engineering Turbo GQ
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests