I agree with fitting Nissan running gear. I have a 110 County with 327 chev, nissan auto, nissan transfer case x 2, and am in the process of fitting the nissan diffs & GU steering box, and a very short rear tailshaft. In comp events the nissan running gear will be much more reliable and parts are more readily available - you can flog them off your team mates.
Peter K.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Running Nissan/Toyota axles?
Moderator: Micka
Nah !! Nissans just don't have the same character - just a strong drivetrain.
Plus the wheel base is too long and the centre of gravity is too high - and you would still have to put a chev motor in it anyway!
Plus I'm ex-army - I think they put something in your food to make you like Landies - still hasn't worn off yet.
Peter K.
Plus the wheel base is too long and the centre of gravity is too high - and you would still have to put a chev motor in it anyway!
Plus I'm ex-army - I think they put something in your food to make you like Landies - still hasn't worn off yet.
Peter K.
bowtie landie wrote:Nah !! Nissans just don't have the same character - just a strong drivetrain.
Plus I'm ex-army - I think they put something in your food to make you like Landies - still hasn't worn off yet.
Peter K.
X2
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Is this that dual cab one that was in cheezys workshop a while back? Any pics, it sounds nice.bowtie landie wrote:I agree with fitting Nissan running gear. I have a 110 County with 327 chev, nissan auto, nissan transfer case x 2, and am in the process of fitting the nissan diffs & GU steering box, and a very short rear tailshaft. In comp events the nissan running gear will be much more reliable and parts are more readily available - you can flog them off your team mates.
Peter K.
No this one has never been to Cheezy's. I'm doing all the work myself. And it's not a dual cab - YET. It will be chopped down into a dual cab styleside before a coat of very bright paint - blue, yellow & green. No pictures as yet - never thought about taking any but I suppose I should.
This is a longer term project - not by choice - but because of other jobs in the workshop (paying jobs) that take pniority.
A few other specs. - the 327 produces about 400 horsepower. the auto has been setup with a clutch so that drive can be dissengaged if things go pearshaped on vertical assaults. Rear tailshaft will be made from a Chevy truck tailshaft, with a very strong double cardon joint, mated to the nissan tailshaft flanges. Floorpans are custom made because the handbrake drum actually sits inside the rear floorpan. The vehicle will stay at its existing height which is 5" above standard with Dobinsons coils. I'm still playing with the shock mounts & shocks. Comp tyres ar 36 x 12.5 Centipedes. Street tyres are 285/76/16 General Grabber AT2s. The existing 33x11.5" Simex tyres have plenty of clearance but I may have to cut the guards for the 36s. It will end up wit a full external (FIA approved) rollcage.
It should be a fun truck - but I've a long way to go yet. Will try to get some pics soon.
Peter K.
This is a longer term project - not by choice - but because of other jobs in the workshop (paying jobs) that take pniority.
A few other specs. - the 327 produces about 400 horsepower. the auto has been setup with a clutch so that drive can be dissengaged if things go pearshaped on vertical assaults. Rear tailshaft will be made from a Chevy truck tailshaft, with a very strong double cardon joint, mated to the nissan tailshaft flanges. Floorpans are custom made because the handbrake drum actually sits inside the rear floorpan. The vehicle will stay at its existing height which is 5" above standard with Dobinsons coils. I'm still playing with the shock mounts & shocks. Comp tyres ar 36 x 12.5 Centipedes. Street tyres are 285/76/16 General Grabber AT2s. The existing 33x11.5" Simex tyres have plenty of clearance but I may have to cut the guards for the 36s. It will end up wit a full external (FIA approved) rollcage.
It should be a fun truck - but I've a long way to go yet. Will try to get some pics soon.
Peter K.
re nissan axles
I have put nissan gu patrolaxles under my rangie ute i have a 6.4 liter chev and gq patrol gearbox and transfer case also we do alot of nissan diff conversions here at my workshop if u have any questions dont hesitate to email me Adrian.
Who is online
Users browsing this forum: No registered users and 17 guests