Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FINISHED

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Thought I better put som photo's up of the front before the weekend as it probable won't look to pretty come Monday. :cry:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

unlucky sam i dont think u even got a scratch on your sliders :cry:

u definatly had some bad luck over the weekend then on the way home :cry: :cry:
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

yes a shocking weekend for the little zuk. a big :armsup: though for sticking with it........what ended up happening with it on sunday sam?
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

antt wrote:yes a shocking weekend for the little zuk. a big :armsup: though for sticking with it........what ended up happening with it on sunday sam?


word on the grape vine is front output shaft on tcase

and a headgasket b4 tenterfield on the way home

and thats ontop of the gearbox and bent links on saturday :cry: :shock:

definalty not a good weekend :cry:
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Must say probably the worst weekend ever. Damage list includes.

Blown gearbox
Two bent lower links
Bent tie rod
Two damaged flares.
One torn transfer case arm.
Broken front out put flange an the transfer.
Blown headgasket.


Hey antt how come you didn't come ad say hello :finger:
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

i was the dero that came over on sunday morning when ya had the gearbox on the ground, but ya's looked busy so i didn't wanna get in the way
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

antt wrote:i was the dero that came over on sunday morning when ya had the gearbox on the ground, but ya's looked busy so i didn't wanna get in the way


ya got that right :lol: :finger:
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

OVERKILL ENGINEERING wrote:Must say probably the worst weekend ever. Damage list includes.

Blown gearbox
Two bent lower links
Bent tie rod
Two damaged flares.
One torn transfer case arm.
Broken front out put flange an the transfer.
Blown headgasket.
for those of us that wernt there I think we are all dying to know what happend to cause all this damage? Also any pics so we can all go ooh argaa thats gotta hurt etc
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Don't be shy next time. I didn't get to speak to many people over the weekend too busy tying to get some sleep or working . :cry:
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

redzook wrote:
antt wrote:i was the dero that came over on sunday morning when ya had the gearbox on the ground, but ya's looked busy so i didn't wanna get in the way


ya got that right :lol: :finger:


shuddup you, i was hungover as well cause of basketcase (he was worse, he didn't show up till the comp site till about 11 cause he was so seedy :D :armsup: )
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

OVERKILL ENGINEERING wrote:Don't be shy next time. I didn't get to speak to many people over the weekend too busy tying to get some sleep or working . :cry:
SAM


:rofl: that reminds me, we came over on sat arvo as well and you guys were all asleep :D

can't blame ya though ;)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Next time we will be more than competitive hey TIM :D :D :D
The next time we are up there mack sure you stop by.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

OVERKILL ENGINEERING wrote:Next time we will be more than competitive hey TIM :D :D :D
The next time we are up there mack sure you stop by.
SAM


i dunno have u decided to sponser me :D



i met antt ;)
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

you should feel priveledged tim :D :finger:

i'm making a movie at the moment of all of the footage i got of you zuk sam. it only goes for a couple of mins, but shows how bad the gearbox was :shock:

should be up in a few minutes ;)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Geeze won't be much action.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

you're right :D , but the gearbox makes some awfull noises :x
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

The way the box was soundin when ya drove past me on the way to stage 1 i didnt think that ya would get to the bottom of the hill to start :shock:
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

Video is done

http://www.4wdlinks.com.au/albums/antt/abe.wmv
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

thanks antt
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Sorry to hear you had a bad run Sam.


2 head gaskets in a week has gotta be some sort of record.
yeshemesh
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

just watched the vidio, those noises really make ya cringe. kind of like watching someone get kicked in the balls.
Top
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

ya might wanna try the copper head gasket trick sam it worked for my mates blown monaro steering finally arrived to thanks
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Ouch, thats a big list of things to fix.

Better change the name of the thread back as it isnt quite so finished anymore.

Better luck next time.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

so what caused all these problems, are they easily overcome or will there need to be a bit of a rethink on how things are setup or was it just bad luck?
Ransom note = demand + collage
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Was the block decked sam?

You shouldn't need the copper head gasket if the internals are stock, but then again you will need it when you put the blower back on.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i met antt too, he crashed our fire and started dissing nsw ppl... then he realised he was the only canetoad left, so he quietened down a bit :D ;)


i came and talked to ya sam, and wasn't just cos i wanted to collect ;) good to put some faces to the names over the weekend

heard a rumour that u might be plannin on building a buggy now?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

stumped wrote:i met antt too, he crashed our fire and started dissing nsw ppl... then he realised he was the only canetoad left, so he quietened down a bit :D ;)




:rofl: wasn't basketcase there at that stage still? fark i dont remember much
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

antt wrote::rofl: wasn't basketcase there at that stage still? fark i dont remember much


he took off for a while :D took ya a bit to notice tho :lol:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

i blame the shit beer i was drinking......vb is the devil :twisted: :D
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

grimbo wrote:so what caused all these problems, are they easily overcome or will there need to be a bit of a rethink on how things are setup or was it just bad luck?



The transfer ands gearbox Ithink were just bad luck but the engine was running hot from the start so there is a problem there.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests