Hi all
Just a question with my 85 runner. Its a YN60 with leaf front. What are the standard suspension heights in them? I measured mine up today and this is what i got
From ground to centre of chassis rail under door 550mm
Bumpstop clearance on front 60mm
Bumpstop clearance on rear 100mm
I know it wont change the bumpstop clearances but in regards to the ground to chassis height i am running 35's.
At the moment Im stuffed what lift if any i have in it. I need to sort a few scrubbing dramas out with the tyres and look at some better springs anyways so i need some idea where i am at at the moment. It clears 35's ok except on tight lock but i am running a 2" bodylift.
Any help will be very much appreciated!
Matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4 Runner suspension heights?????
Moderators: toaddog, Elmo, DUDELUX
hilux
Take it to a reputable workshop and they should be able to tell you straight away.
Or bring it to us and we will havalook for you, for nothing, wont charge, free. Get the drift??
Or bring it to us and we will havalook for you, for nothing, wont charge, free. Get the drift??
Mitchell Bros 4x4 & More
16 Chard Road Brookvale NSW 2100
02 9905 4764
http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
16 Chard Road Brookvale NSW 2100
02 9905 4764
http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
Who is online
Users browsing this forum: No registered users and 0 guests