Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

free revving sd33

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

free revving sd33

Post by Wish I had coils »

A little help would be good just took sd33 motor out of smashed mud runner bolted into new body, after much bleeding we got it started, but when she started she went into self distruct mod revving her brains out.
She has no throttle responce at all just revs till i pull the fuel cut out
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Sounds like you have a pump problem. There is no governor control inside it, generally from something not moving freely inside. Do you have another pump to try on it?
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 191
Joined: Thu Dec 07, 2006 8:56 pm
Location: Sunny Coast

Post by killer_garden_gnome »

they are vacuum opperated govenor if you have the two vacuum hoses on the back of the pump crossed it will cause full revs or make sure the line is coming from the vacuum side of ur intake manifold
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

Cheers i'll check it out ! it has to be somthing basic, cause the motor ran fine in the other truck
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

does your throttle cable goto you injector pump or the 3in butterfly ontop on the inlet manifold
No sig line pics please.
Post Reply

Who is online

Users browsing this forum: No registered users and 129 guests