hello
i am going to look at a 12ht this week end and i would like to know what would be considered as acceptable compression for one with 263000K's on it???
how do i perform the compression test ???
and what oil pressure should it have???
and if anyone can think of anything specific i should look for ???
any help will be greatly appreciated
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12ht compression test
Moderators: toaddog, Elmo, DUDELUX
Oil pressure 85psi at 3000rpm nominal.
Nominal Compression 427psi 2942kPa
Minimum Compression 284psi 1961kPa
Max Difference Between Cylinders 28psi 196kPa
Look for rust, particularly around roof line
Look for oil leaks (rear main, front main)
Look for oil leaks around the hubs, diff oil will run down the inside of the tyre.
look for oil leaks around the pinion front and rear.
Nominal Compression 427psi 2942kPa
Minimum Compression 284psi 1961kPa
Max Difference Between Cylinders 28psi 196kPa
Look for rust, particularly around roof line
Look for oil leaks (rear main, front main)
Look for oil leaks around the hubs, diff oil will run down the inside of the tyre.
look for oil leaks around the pinion front and rear.
Who is online
Users browsing this forum: No registered users and 0 guests