I've been thinking about getting balljoint spacers made up for the independent torsion bar setup on my feroza.
How thick can the spacer be? I know i can get 60mm lift with still having a bit of down travel.
Would 75mm/3 inches be possible with a spacer?
Would I need an engineers cert for the balljoint spacer?
Thanx
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Balljoint Spacer
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Balljoint Spacer
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
I've done this mod. Sent in application to qld trpt and got it all aproved. mine are 10mm thick and bjoint is flipped from top side to bottom side. Not sure on measurements of travel but it would vary from car to car. I don't know if this is common practice on ferozas but it is on isuzu's in the states and also pajeros in japan. I dunno if i would like to be the first person to try it on a car which hasn't been done because there are certain issues regarding strength and failures. if they do fail there could be quite devastating results. Try searching for some other ppl that may have done this mod before.
mike.
mike.
"If it ain't broken, smash it harder, then make it stronger!"
Hi Mike
Thanx for the reply. I have been told the balljoint is on the bottom side. Heres a link 2 a pic of the setup on the feroza http://www.outerlimits4x4.com/PHP_Modul ... hp?id=9812
I know of one guy who has done the spacer so i'll find out what he did and if hes had any problems or not.
Thanx again
James
Thanx for the reply. I have been told the balljoint is on the bottom side. Heres a link 2 a pic of the setup on the feroza http://www.outerlimits4x4.com/PHP_Modul ... hp?id=9812
I know of one guy who has done the spacer so i'll find out what he did and if hes had any problems or not.
Thanx again
James
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
Who is online
Users browsing this forum: No registered users and 1 guest