Outer Limits 4x4 Board

Ok .. do anyone know where you can get these from in Brisbane?

I have tried CBC, Nissan, the 3 local bearing places to enoggera.. but cant find anything..


Help!

Buy some sheets of shim steel and make them if you need to.
Maybe Toyota ones will fit?
Have you tried a 4x4 specialist?

Hope one of these helps....

You can buy these shims from Nissan part numbers and sizes as follows
40571-01j00 0.5
40603-44000 0.762 mm
40604-44000 0.254 mm
40605-44000 0.127 mm
40206-44000 0.075 mm
Nissan's Brisbane warehouse is showing stock of all
Hope this helps

Hi all. I've been in the process of tracking down shims for my GQ as well. All of the Cruiser/Hilux kits i've done come with shims - but not the Nissan kits. I've tried every workshop in my town with no joy, even the mechanic that owns 3 GQ's couldn't help me. Tried 3 major auto/4x4 suppliers down in Melbourne also with no luck. Nissan had stock of every size, but they wanted $16.85 FOR EACH BLOODY SHIM!!! I know genuine parts aren't cheap, but what a joke!!! The aftermarket Toyota kits come with 12 or 16 of the bloody things (3 or 4 thicknesses).

I think i might have to resort to shim paper/sheets and make my own.

Coxy

SHIFTY wrote:You can buy these shims from Nissan part numbers and sizes as follows
40571-01j00 0.5
40603-44000 0.762 mm
40604-44000 0.254 mm
40605-44000 0.127 mm
40206-44000 0.075 mm
Nissan's Brisbane warehouse is showing stock of all
Hope this helps

Yeah, i got the spare parts guy to look up the parts for me, and cause i don't know exactly what size shims i need, i said "If they're cheap enough, i'll buy three different sizes in quantities of four". I reckon the guy at the sales desk 10 meters away heard my sphincter clamp up when he gave me the price.

Coxy

Only the .5 one is $16.00 odd bucks but the others are between $3 & $6 ea.

Serious!!! The bugger told me they were all $16 regardless of size. I told him i'd get them somewhere else - i'm going to look like a tool when i go back in there......

Coxy