okeydokey,
are there any of those $20 hooks they sell in 4wd stores that fit an 80 series bolt holes at the bottom of the bull bar. all the ones i have seen have the holes too close together.
If there are I can't find them.
anyway i parted with $40 for one piece of bent metal painted red, and it hangs down alot lower than the hooks. would also prefer teh hooks so i don't have to use a shackle.
does anyone sell them in sydney?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Towhooks headache!!
Moderators: toaddog, TWISTY, V8Patrol, Moderators
just made the $40 one fit and bought some high tensile bolts for it.
after calling around and being tole yes we have them come and get them then getting there and them being not what i asked for I just thought F*#k it. I'll use the most expensive piece of bent metal I have ever bought and deal with it.
I'll take a pic later and post it for ya
after calling around and being tole yes we have them come and get them then getting there and them being not what i asked for I just thought F*#k it. I'll use the most expensive piece of bent metal I have ever bought and deal with it.
I'll take a pic later and post it for ya
please post pics as I have the same dramas and just drilled a new hole to suit the hook.
I don't think it's strong enough to snatch off but I have seen pics in a well known Aus 4wd publication where the original tow hooks fit in the holes perfectly.And we all know the carry on with those hooks.ie.Tie downs only,yeah yeah.
Can't really find anywhere else to put them.
I don't think it's strong enough to snatch off but I have seen pics in a well known Aus 4wd publication where the original tow hooks fit in the holes perfectly.And we all know the carry on with those hooks.ie.Tie downs only,yeah yeah.
Can't really find anywhere else to put them.
FYI you can get rated hooks (and I'm not talking about the tie down loops) from a Prado or 100 series that fit the 80. You may be able to pick them up from a wreckers or if you're feeling flush then you can get the genuine article from Toyota for about $130.00 a hook 
I managed to pick up one a gazillion years ago and haven't been able to find too many since.
I managed to pick up one a gazillion years ago and haven't been able to find too many since.
Have you ever wondered how you get triangles from a cow? You need butter, milk & cheese and an equilateral chainsaw!
Here's how I fixed mine. A couple of hours and all done.topend-yobbo wrote:please post pics as I have the same dramas and just drilled a new hole to suit the hook.
I don't think it's strong enough to snatch off but I have seen pics in a well known Aus 4wd publication where the original tow hooks fit in the holes perfectly.And we all know the carry on with those hooks.ie.Tie downs only,yeah yeah.
Can't really find anywhere else to put them.
http://www.outerlimits4x4.com/viewtopic ... light=hook
They don't make them. You need to modify the holes and bullbar then. I have seen where people have mounted the hooks on the bullbar next to the uprifghts.topend-yobbo wrote:Top idea but my bullbar is mounted using those holes and I can't do what you did.
Would be no problem at all if I could find hooks with the same hole pattern.
Who is online
Users browsing this forum: No registered users and 35 guests