Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Looking for a coily rolling frame
Looking for a coily rolling frame
Hello, I'm looking for a coily rolling frame for sale to be shipped to the US anyone have one???
There was two that keep doing the rounds on e-bay.
Think he wanted $100 and $150 for them each.
The only reason I didn't get one is he is in queensland.
I'll keep my eye out and if I find one I'll let you know.
Cheers Nick
Think he wanted $100 and $150 for them each.
The only reason I didn't get one is he is in queensland.
I'll keep my eye out and if I find one I'll let you know.
Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
[/quote]
bazooked:
I'm building a 2wd street samurai and the coil over set-up on the "coily" would fit perfectly into my build. I actually only need the complete suspension so I could graft it onto my "leafy" It might be easier to get the frame and swap over bodies.
If anyone knows where I could get a complete suspension to swap over as well I'd be greatful for that as well.
I'm building a 2wd street samurai and the coil over set-up on the "coily" would fit perfectly into my build. I actually only need the complete suspension so I could graft it onto my "leafy" It might be easier to get the frame and swap over bodies.
If anyone knows where I could get a complete suspension to swap over as well I'd be greatful for that as well.
mud4b on this forum is the one selling the coily chassis I believe, give him a PM
Here's the Ad from our Trading Post
http://www.autotrader.com.au/iteminfo/a ... cessories_
CONTACT: Mark
PHONE: 54791877
ADDRESS: 1/18 Kayleigh Drive
Maroochydore, 4558
Here's the Ad from our Trading Post
http://www.autotrader.com.au/iteminfo/a ... cessories_
CONTACT: Mark
PHONE: 54791877
ADDRESS: 1/18 Kayleigh Drive
Maroochydore, 4558
Zuku26,
how hard have you though this through? EVERYTHING on the front of a coil sierra is different, quite apart from it being RHD. If you have the skills to fabricate you way around the RHD problem, then you would be able to fabricate a basic hot rod style front end using parts you can acutally replace in the US.
some of the issues include:
The front axle takes a reverse rotation front diff, which is unique to the coil car. Ratio is 4.1:1 and there are basically no other ratios available. A coiler has the tie rod running behind the axle and under the pinion, so you can't swap in a conventional diff.
Coiler axles are 1.5" wider overall, and run different wheel bearings, knuckles, spindles, calipers, caliper mountings etc.
By the time you got a "suspension" from a coil car, every single part of it will need to be changed. You will end up with two radius arms which are prone to bending and have non replaceable bushings.
I a not really sure what you are shooting for, but my guess is that hot rod front end stuff will be the answer.
PS there is a reason that coil chassis etc are so cheap
Steve.
how hard have you though this through? EVERYTHING on the front of a coil sierra is different, quite apart from it being RHD. If you have the skills to fabricate you way around the RHD problem, then you would be able to fabricate a basic hot rod style front end using parts you can acutally replace in the US.
some of the issues include:
The front axle takes a reverse rotation front diff, which is unique to the coil car. Ratio is 4.1:1 and there are basically no other ratios available. A coiler has the tie rod running behind the axle and under the pinion, so you can't swap in a conventional diff.
Coiler axles are 1.5" wider overall, and run different wheel bearings, knuckles, spindles, calipers, caliper mountings etc.
By the time you got a "suspension" from a coil car, every single part of it will need to be changed. You will end up with two radius arms which are prone to bending and have non replaceable bushings.
I a not really sure what you are shooting for, but my guess is that hot rod front end stuff will be the answer.
PS there is a reason that coil chassis etc are so cheap
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
The front axle takes a reverse rotation front diff, which is unique to the coil car. Ratio is 4.1:1 and there are basically no other ratios available. A coiler has the tie rod running behind the axle and under the pinion, so you can't swap in a conventional diff.
Coiler axles are 1.5" wider overall, and run different wheel bearings, knuckles, spindles, calipers, caliper mountings etc.
By the time you got a "suspension" from a coil car, every single part of it will need to be changed. You will end up with two radius arms which are prone to bending and have non replaceable bushings.
I'm building a 2wd street samurai
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Yes yes, I was paying attention, but as I said, if you ignore the front diff, then what is useful out of a coiler if it was to be converted to LHD? 2 radius arms, and maybe the shock mounts, all of which is garbage anyway. None of the spacing will work out with a front mounted tie rod at stock ride height, (I have tried to work this out before) so the tie rod will have to still go behind the axle, so unless custom/off application knuckles were being used, then the builder would still need the coiler knuckles, which means coiler spindles bearings, calipers etc.
The US market did receive 2WD Samurai.... I can't see why some short hot rod coilovers and a simple link front set up from a hot rod shop wouldn't be heaps easier than trying to import coiler stuff.
The US market did receive 2WD Samurai.... I can't see why some short hot rod coilovers and a simple link front set up from a hot rod shop wouldn't be heaps easier than trying to import coiler stuff.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
just cruizin' wrote:mud4b on this forum is the one selling the coily chassis I believe, give him a PM
Here's the Ad from our Trading Post
http://www.autotrader.com.au/iteminfo/a ... cessories_
CONTACT: Mark
PHONE: 54791877
ADDRESS: 1/18 Kayleigh Drive
Maroochydore, 4558
yup it was me.
i have sold them both.
ps work number is now 54789994..
e-mail is now suziworxplu2@hotmail.com
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
I was under the impression that suzuki had designed the coily suspension utilizing existing mounting locations from the leafy. and had not done a complete suspension and frame redesign. They did do a redesign of teh entire vehicle for the Jimny though. I figured If I could at least swap the body from my leafy to the coily. But if I could just mount the suspension itself I'd be golden.
Some one has to have a bunch of pics of the stock coil suspension
Some one has to have a bunch of pics of the stock coil suspension
Who is online
Users browsing this forum: No registered users and 2 guests