Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
starting to look at redoing my belly since its a lwb it is has more chancesof bellying (only done it 3 times) .... question is
when you put a flat belly pan on whathave you's done with the gbox cross memeber since it sits below the chassie ... hammer it flat , cut it fully out an replace it or something else
or you could rubber mount the box onto the crossmember with the standard mounts and hard fix the cross member to the chassis by drilling and crush tubing the chassis
