Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
s/s water tank
Moderators: toaddog, TWISTY, V8Patrol, Moderators
s/s water tank
can anyone plase give me a rough idea on what price i would be looking at for a 100 litre ish stainless steel watertank to be made up. its to fit underneath a trayback. stainless is the way to go right?
I have a wedge shaped one (wide at bottom, uses seat mount bolts, narrow at top, with filler) that fits behind the middle row seats against cargo barrier.. think its 60ltrs.. very kewl but doesnt fit the GU :(MAVRK-4 wrote:I am currently getting a 42L water tank made up of 2mm Stainless here in Adelaide, it's an internal water tank though to suit a wedge void between the rear seats and a draw system.
So far the quotes have been from $935 to $1300+!
Opted with $935 ($850+GST)
going cheap...
tank
i can make any size or shape tank out of staino for you im in hunter valley nsw work for cash or trade
If i just overtook you head to your nearest mechanic
I was thinking about making one up(got heaps of 2mm staino at work) but the biggest problem I can think of is cleaning the inside of the tank after welding. I'm thinnking about putting it under the passenger side floor - mounted to the chassis. Has anyone got a pic of one of these on an 80 series?
80 Series forum
www.offroad80s.com
www.offroad80s.com
tank
hey shane just purge it (argon) and all will be good nice clean weld with little to no burn if done properly
If i just overtook you head to your nearest mechanic
Thats ok I have mine being made to suit a very custom fit, attaches to the end of a Black Widow drawer system and half cargo barrier, allows seats in or out without using the seat bolts as these are also used for a twin level custom storage system that replaces the rear seats as required (similar to Black Widow design)bogged wrote:I have a wedge shaped one (wide at bottom, uses seat mount bolts, narrow at top, with filler) that fits behind the middle row seats against cargo barrier.. think its 60ltrs.. very kewl but doesnt fit the GU :(MAVRK-4 wrote:I am currently getting a 42L water tank made up of 2mm Stainless here in Adelaide, it's an internal water tank though to suit a wedge void between the rear seats and a draw system.
So far the quotes have been from $935 to $1300+!
Opted with $935 ($850+GST)
going cheap...
Who is online
Users browsing this forum: No registered users and 9 guests