Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

86 pajero chassis rail width at the front

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

86 pajero chassis rail width at the front

Post by hulsty »

G'day all hows it going, just a quick question, what is the front chassis rail width of a pajero where the bumper mounts on to? outside to outside and inside to inside?

thanks for your help

cheers
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

anyone able to help? even a rough measurement would be of help

cheers
Top
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Post by NCpaj »

outside to outside measurment
(Roughly) 765mm

inside to inside
650mm


also the stock bullbar mounts to outside out the rails at the front,

Hope this helps
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

sounds the same as my 97 model. My $10 arb bar off ebay bolts on but isnt quite right as it is straight across and doesnt bend back around. also it lays back a bit so i need to redrill the rear bolt holes to tilt it forward.

Just some more info for ya.

Cheers
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests