Hi all
I am going to put 35's on my Mav when i sell my muddies and i would like to be able to get one of those speedo reducers than can be put on it to calibrate the speedo to suit.
Where and how much do i get them from.
Cheers in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Speedo unit for larger tyres (where to get it)
Hey mate,
you get em from marks adapters.
They are about 190 bucks for GQ's/GU's and you can switch em depending on what tyres you run. ie offroad run 35's on road 33's.
I actually have on of these that I never fitted to my gq and then I sold the truck so I still have it in the original bag.
you could have it for 150 bucks delivered to ya door if you want one a bit cheaper than new. (as I said it has never been fitted and still in original packaging) I can put it through work if need be so you could use ya card if necessary.
Cheers
Brian
you get em from marks adapters.
They are about 190 bucks for GQ's/GU's and you can switch em depending on what tyres you run. ie offroad run 35's on road 33's.
I actually have on of these that I never fitted to my gq and then I sold the truck so I still have it in the original bag.
you could have it for 150 bucks delivered to ya door if you want one a bit cheaper than new. (as I said it has never been fitted and still in original packaging) I can put it through work if need be so you could use ya card if necessary.
Cheers
Brian
The GQ run a 2 Wire VSS Induction unit, The Marks one works a treat and is pretty much plug and play.
It connects to the existing Nissan Wiring Loom and all you need on top of that is an earth and a Power.
Have to drill a 25mm hole in the transmission tunnel (i drilled a 22mm and it worked better IMO) which is sealed up by the supplied grommet around the loom.
The manual comes with settings for common tyre sizes so it really is easy as to install.
It connects to the existing Nissan Wiring Loom and all you need on top of that is an earth and a Power.
Have to drill a 25mm hole in the transmission tunnel (i drilled a 22mm and it worked better IMO) which is sealed up by the supplied grommet around the loom.
The manual comes with settings for common tyre sizes so it really is easy as to install.
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
[url=http://www.tractivforce.com]TractivForce[/url]
Who is online
Users browsing this forum: No registered users and 143 guests