Im fitting our uhf to the ute.........One thing though, I cant work out to sepurate the center console....I mean remove the gear lever bit from the hand brake bit, any ideas?
Ive removed the two screws all the way up the front on either side of the gear lever 1/2.....also the two in the rear box of the hand brake 1/2.
I dont want to break clips or whatever etc....
Im fitting the uhf to the space below the cd player..... do I even need to remove console, its just most other cars I needed to pull it out.......
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
06 RA Rodeo Centre Console
Moderator: Moderators
06 RA Rodeo Centre Console
Andrew
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
For anybody in the distant future that may drop in here ....
The centre console comes out easy......the rear or hand brake part comes out first. Remove the screws in the storage box then pull up at the front. One guy told me to push forward then up, and now Ive got a broken clip........
The front , just lift up from rear and it is hinged at the very front, so just need to lift a little to remove all the way.
The large bit around cd player, heater controls etc just pulls out. just need to work your way around it and be gentle......
if anybody reads this at some point can you let us know if there are any really active Rodeo sites out there?
The centre console comes out easy......the rear or hand brake part comes out first. Remove the screws in the storage box then pull up at the front. One guy told me to push forward then up, and now Ive got a broken clip........
The front , just lift up from rear and it is hinged at the very front, so just need to lift a little to remove all the way.
The large bit around cd player, heater controls etc just pulls out. just need to work your way around it and be gentle......
if anybody reads this at some point can you let us know if there are any really active Rodeo sites out there?
Andrew
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
amshaw,
There is a good isuzu/holden section on this forum
http://forum.australia4wd.com/index.php
Not too active, but some decent people to help out.
There is a good isuzu/holden section on this forum
http://forum.australia4wd.com/index.php
Not too active, but some decent people to help out.
Thanks mate, Im a member there too. As you say not really active but great people there.
I also have a '98 Disco and I cant get over how active the LR forums are......but same again great bunch of people who fall over them selfeve's to help.
Are there anymore out there that Ive missed? What about yahoo clubs?
I also have a '98 Disco and I cant get over how active the LR forums are......but same again great bunch of people who fall over them selfeve's to help.
Are there anymore out there that Ive missed? What about yahoo clubs?
Andrew
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab
"Put The Wet Stuff On The Red Stuff"
Who is online
Users browsing this forum: No registered users and 1 guest