Page 1 of 1

Missing air duct

Posted: Mon Mar 19, 2007 8:13 pm
by Papa_G
Recently went to fit a snorkel to find that i am missing the S shaped duct from the air filter to the wheel arch to connect to the snorkel.

anyone know where i can find one, or if its easy enough to make a replacement. I have tried wreckers but are apparently as rare as hens teeth.

any help would appreciated

Dave

air

Posted: Mon Mar 19, 2007 9:47 pm
by klrevo
i replaced mine when doing the snorkel with air duct tubing. Available as a ricer product from autobahn, supercheap, repco or what not as a ducting for cold air intake on performance cars. Comes in 3" and about 1m long. Works well for me, and very easy to work with.

dean ;)

air

Posted: Mon Mar 19, 2007 9:49 pm
by klrevo
edit: pics can be seen in this thread, itll make it a lot easier to understand what the hell i am on about.

http://www.outerlimits4x4.com/viewtopic ... ght=snorks

dean ;)

Posted: Tue Mar 20, 2007 8:45 am
by Papa_G
thanks for the help mate

i had a look at the gap between the air filter and the body, and dont think that i will get 3" tubing in there. there is currently a gap of about 50mm at the front and 80mm at the rear of the filter. So i guess ill have to try it out with some smaller gear but still cant work out how to connect the round tube into the rectangular hole in the filter :cry:

Dave

Image

Posted: Tue Mar 20, 2007 11:07 pm
by CHIEF88
Papa_G wrote:but still cant work out how to connect the round tube into the rectangular hole in the filter :cry:
hehehehe gw gw, sure is a mystery that one :P
Find ur self a little marang flame throwers (somones wife/gf/mum would use to crisp the top of a desert) and just heat some pvc and give it a red hot DIY go :P ill help if ya like (so i know for when i get a snorkel of course :P) gotta make a w.e out of it wreckers as well ?

wonder if anyone else has had ur problem or does ur paj just not come with that part ?

Posted: Tue Mar 20, 2007 11:09 pm
by CHIEF88
hmm might be a silly question if uve seen a paj b4, but where does the air from ur little bonnet scoops enter the filter ??

Posted: Tue Mar 20, 2007 11:25 pm
by Papa_G
The bonnet scoops are purely just for the intercooler thats mounted on top.
My air filter is currently getting its air just from excess hot air round the engine bay

From what i can gather from various people i have spoken to about this, the S shaped duct that im currently missing is there to drag cooler air from the wheel arches or from around that area anyway.


and i think i might take you up on your offer to help with the fabrication of this snorkel piece haha

Dave

Posted: Wed Mar 21, 2007 10:15 am
by RO8M
CHIEF88
little marang flame throwers
That is the tops'est phonetic spelling I've seen so far!! took me like a minute to figure you were talking about a meringue!!

Posted: Thu Mar 22, 2007 1:19 pm
by CHIEF88
haha sorry i guess i was just too lazy to look up the correct spelling of the word :P not that any search engine would of known wtf i was meaning by "marang" haha