Outer Limits 4x4 Board

Hey guys.

My rear diff centre cw and pinon has decided to give up the ghost and slop out everywhere.

my question is...well there are afew.

can i use a cw from one diff and a pinon from another? will the mesh right and not give me 1/2 a wheel turn of slop?

and if i cant will a chipped tooth whine like a woman and cause more damage?

centre will be locked when removed either way.

which of the two ways would be best? or can someone suggest another alternative. i need this going again by monday evening for work on tuesday.

Can u use both the pinion and cw from other one u got some 1/2 diffs there.

yeah i have a spare front centre with cw with some chips which is my preference for using as its all good apart from them.

and a spare rear centre with good cw but buggered pinion bearing. unsure on condition of pinon itself.

plus the diff in the car that has buggered cw/pinion

u need a matched pair, with no chipped teeth, it will only cause u more problems in the long run.

As Bazooked said, you should use a matched pair. As the Pinion and crownwheel spin they match wear to each other. Swapping a different crownwheel will cause noise and more issues later.

Layto....

thanks guys.

looks like im gonna have to use the chipped teeth ones. all should be good ive had a diff guy check it out and he thinks it should be ok.