Oil catch can

Post by **bigbennymq** » Mon Apr 09, 2007 5:23 pm

Ey guys, got a oil catch can and lines wanna put it in the mq , i have a head cover or whateva they are callled with the attachment already on it for the lines how do i take the old cover off the engine and do i need to do anything with the new one when puttin it on thanks

Post by **tna racing** » Mon Apr 09, 2007 6:46 pm

hey mate.dnt you mean the rocker cover.

Post by **bigbennymq** » Mon Apr 09, 2007 8:04 pm

yes thats the one

Post by **tna racing** » Mon Apr 09, 2007 9:54 pm

take the air cleaner off.undo the bots in the head.move what evers out of the way and just lift it off.u will most likely need new rocker cover gasket.

Post by **bigbennymq** » Tue Apr 10, 2007 9:28 am

would the gasket or seal be a bit of rubber which goes around the ouside of the rocker cover (inside the rocker cover) and just bolt it back on tight?

Post by **nastytroll** » Tue Apr 10, 2007 9:32 am

that the one, as long as theres no nicks or its not hard n cracked you should be able to re-use it

Outer Limits 4x4 Board

Oil catch can

Oil catch can

Who is online