Page 1 of 1
Oil catch can
Posted: Mon Apr 09, 2007 5:23 pm
by bigbennymq
Ey guys, got a oil catch can and lines wanna put it in the mq , i have a head cover or whateva they are callled with the attachment already on it for the lines how do i take the old cover off the engine and do i need to do anything with the new one when puttin it on thanks
Posted: Mon Apr 09, 2007 6:46 pm
by tna racing
hey mate.dnt you mean the rocker cover.
Posted: Mon Apr 09, 2007 8:04 pm
by bigbennymq
yes thats the one
Posted: Mon Apr 09, 2007 9:54 pm
by tna racing
take the air cleaner off.undo the bots in the head.move what evers out of the way and just lift it off.u will most likely need new rocker cover gasket.
Posted: Tue Apr 10, 2007 9:28 am
by bigbennymq
would the gasket or seal be a bit of rubber which goes around the ouside of the rocker cover (inside the rocker cover) and just bolt it back on tight?
Posted: Tue Apr 10, 2007 9:32 am
by nastytroll
that the one, as long as theres no nicks or its not hard n cracked you should be able to re-use it