Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5.0L kw figures.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

5.0L kw figures.

Post by Rhysta »

Just after figures of what people have got after doing this conversion.

At wheels.
Top
Posts: 146
Joined: Sun Jul 13, 2003 3:01 pm

Post by marko »

170rwkw on 31''. But worked. Flat top pistons, crane cam, etc ,etc
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

Yeah the motor's im looking at all very modified.

But im a little worried how they will go in low rev's off road driving.
Top
Posts: 146
Joined: Sun Jul 13, 2003 3:01 pm

Post by marko »

I use the car for of road racing so low down doen't matter so much but in saying that its stills pulls hard from 2000rpm to 6000rpm. It does idle pretty rough up to 2000rpm so that may effect rock crawler if thats whats your into. The cam will determine how good low dowm power is. I use a crane 286. So maybe a 276 or 284 maybe better suited.
How much power is this engine meant to have and what components
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

Not to sure atm, will find out more later on this week.

Has any1 else got ouput figures?
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

Any one else?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest