Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
here is mine off my fj73
made with 3 inch steel exhaust pipe and flexy rubber hose for the bends, and at the top i cut the pipe on an angle and welded another piece on to make it kick vertical at the top for the attachement of the snorkle head
All up it cost $120: 30 for steel pipe, 40 for flex rubber pipe, 20 big hose clamps, 30 for safari snorkle head from wreckers
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
yeah stainless is more expensive and that turbo silicon hose i think is around $100+/per meter i think don't know what bends are woth but they look bling also if your in qld, transport dep will probaly be able to defect you because it's "reflective" just like chrome or anodised gauge covers on bonnet or piller.
Sic Lux wrote:yeah stainless is more expensive and that turbo silicon hose i think is around $100+/per meter i think don't know what bends are woth but they look bling also if your in qld, transport dep will probaly be able to defect you because it's "reflective" just like chrome or anodised gauge covers on bonnet or piller.
the blue bends are about $70 each and bright polished stainless i payed $80 for 4foot from ebay
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
cool knew some one would know i'd preffer plastic say safari or airtec style as i've had mine squashed flat on embankments trees etc and it just pops out and doesn't damage the body but steel pipe will do some damage and need replacing. Just something to consider
