Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will ln106 safari snorkel flow enough for worked 308?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Will ln106 safari snorkel flow enough for worked 308?

Post by Tuflux308 »

Have worked 308 in my hilux and need snorkel, want to know whether this snorkel will flow enough air, or whether i am better of going to a custom stainless, cheers
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

i'd say yes it would but if you do get one and like my mates one we just got it had a washer with it to stop the plastic of the snokel folding when it was clamped and it had a piss small hole in it to let air flow so get it spun in a lathe and machine it out till there is about about 10mm of washer left all the way around and it should be fine. When you see one you'll know what i mean
plenty of parts on the bench
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

From what I found out when a mate of mine had the snorkel fitted to his 4 runner diesel the washer in the top was supposed to stop an induction whistle that annoyed a lot of people. It was actually a $10 dollar option when he had it done.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Best to run the snorkel and a second intake tube up to the rad support panel to get cold air there...with the option to block it off when offroad...any snorkel will restrict flow and power somewhat....
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

another option is twin snorkals but that might be over kill.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Twin stainless would be cool and didn't know that about the washer as we got it 2nd hand don't think you'd worry about it if it was v8 so many other noises
plenty of parts on the bench
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

i think i may just go 3.5 in stainless, either down the gaurd or through the top of the boonet next to the hinge. then up the pillar , safari would be easier, but dont know whether it going to supply enough air, dont really want to have it sucking from two outlets, then blocking one when 4 wheel driving, that's really when i want it to perform.. cheers guys
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 57
Joined: Fri Sep 15, 2006 1:09 pm
Location: croydon

Post by punk_180 »

hey all,

the Safari snorkel will be fine to install on the 308. you will only need the one. We have people using the standard intake on the 6.5ltr TD chev motors.

The "washer" that you are talking about was installed in the Hilux's because we found that they were getting a little bit of engine resonance out of them. So to fix it we found that you could just put the washer in there. this can be taken out but you will just have a lttle bit more noise.

Im sales manager at Safari this is how i know.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest