ive got qn NP205 and my patrol unijoints / driveshafts are a perfect fit for the NP205 driveshaft attachment... they dont have a flange as such. they have a unijoint socket that the shaft unijoint slots in...
now i think there is some little u bolts of sorts that bolt the driveshaft to this peice.... im chasing some of these or exactly wat they are and where i can get them from.....
anyone with any info would be kewl.
cheers
screwy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
driveshaft unijoint u-bolts
Moderators: toaddog, TWISTY, V8Patrol, Moderators
driveshaft unijoint u-bolts
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Re: driveshaft unijoint u-bolts
yep common on many Dana diffs. You just need to go to a Driveline Shop.Screwy_ScrewBall wrote:ive got qn NP205 and my patrol unijoints / driveshafts are a perfect fit for the NP205 driveshaft attachment... they dont have a flange as such. they have a unijoint socket that the shaft unijoint slots in...
now i think there is some little u bolts of sorts that bolt the driveshaft to this peice.... im chasing some of these or exactly wat they are and where i can get them from.....
anyone with any info would be kewl.
cheers
screwy
http://www.driveline.com.au/
These guys will have everything you need. Give them a call tell them what you want and they will have it.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Most older cars (holdens Fords etc) had this style of U-hoint. Basically they look like little u-bolts but the curves section is flattened out to sit fluch in the bearing cap. What sized u-joints are you running in your shaft Jeff? That link POS posted looks like they would easy sort you out 
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
well i tried the f truck wreckers and they werent in the slightest bit interested in looking for me so ill have to try elsewhere.
thanks for the link ill give them a go...
no idea wat size they are... ill ring up and ask wat measurement they need.
screwy
thanks for the link ill give them a go...
no idea wat size they are... ill ring up and ask wat measurement they need.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
The small GQ joints fit into #1350 Dana/Spicer yokes and the big GQ joints fit into #1410 Dana/Spicer yokes. I would guess the MQ joints would be the same size as the smaller (front) GQ unis.Screwy_ScrewBall wrote:no idea wat size they are... ill ring up and ask wat measurement they need.
Check one of your joints against the front shaft in a GQ, but that would make sense to me, #1350 yokes would be the right size to be standard equipment on a 205. IF this is correct you just need to ask for 2 sets of straps for #1350 yokes.
NO THEY DONT. small patrol uni is a RUJ2028 and is 28mm cap X 55.96 wide inside circips .1350 uni is a 5.178X and is 30.16mm cap X 92.08 wide outside circips. large patrol uni is a 901003 and is 32mm cap X 68.2 inside circips and 1410 uni k5GB10R is 30.16mm cap X 106.35 outside circips although these sizes may be close but close enough is not good enough when it comes to uni joints.the unis in your MQ shafts will be RUJ2028s they do convert to 1310 series RUJ2028.13XR which it sounds like your dana yokes are if the 2028s seam to fit but they could 1350 or 1410(unlikely) if their 1310 the u bolt kit you need is a 2.94.28X . 1350&1410 kit is 3.94.18XWendle wrote:The small GQ joints fit into #1350 Dana/Spicer yokes and the big GQ joints fit into #1410 Dana/Spicer yokes. I would guess the MQ joints would be the same size as the smaller (front) GQ unis.Screwy_ScrewBall wrote:no idea wat size they are... ill ring up and ask wat measurement they need.
Check one of your joints against the front shaft in a GQ, but that would make sense to me, #1350 yokes would be the right size to be standard equipment on a 205. IF this is correct you just need to ask for 2 sets of straps for #1350 yokes.
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
You are obviously right, as you know your numbers, but I have seen both these combinations (nissan/spicer) used and the tolerances seem way, way closer than what they would be with the dimensions you have listed??rvh96 wrote:NO THEY DONT. small patrol uni is a RUJ2028 and is 28mm cap X 55.96 wide inside circips .1350 uni is a 5.178X and is 30.16mm cap X 92.08 wide outside circips. large patrol uni is a 901003 and is 32mm cap X 68.2 inside circips and 1410 uni k5GB10R is 30.16mm cap X 106.35 outside circips
Just make sure you DON"T ask for straps - or youll get useless weak little bits that need to be bolts to the yoke.
Ask for u-bolts and I would have expected them to be 1310 size.
Give us a yell if you can't find them as I have some on the shelf.
Cheers
Ask for u-bolts and I would have expected them to be 1310 size.
Give us a yell if you can't find them as I have some on the shelf.
Cheers
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Who is online
Users browsing this forum: No registered users and 2 guests