storage containers

Post by **hypo** » Mon Dec 08, 2003 6:04 am

just looking 4 some plastic sealed storage boxes 2 bolt under my tray.

while at woodpecker the other weekend i noticed a dude from the jeep club won some gear and 1 of the products was a blue storage container similar 2 the ARB jobs but it had the latches on the top, just wondering if any1 saw wot brand it was ???

any1 using anything like this or have links 2 something ??

Post by **fatassgq** » Mon Dec 08, 2003 6:41 am

I am keen to find a good place/brand of these things also as I want to put one bout 1000 X 600 or so under my new tray.
I think someone found a supplier or something of these a while back.
too early for search!!! :finger:

Post by **fatassgq** » Mon Dec 08, 2003 11:35 am

hey hypo I did some searching and I think there are a couple of mobs that make em. Trimcast and some other plastics rotomould place starting with G i think
Not much help I know, but..... :roll:

Post by **Area54** » Mon Dec 08, 2003 12:17 pm

fatass75 wrote:hey hypo I did some searching and I think there are a couple of mobs that make em. Trimcast and some other plastics rotomould place starting with G i think
Not much help I know, but.....

Gough plastics might be the place you are thinking of fat, but I think they only make the boxes similar to the ARB Trimcast spacecases, and also undertray boxes (the ones that go in front/behind of the wheel arches).

Post by **Slayer** » Mon Dec 08, 2003 12:28 pm

heres the gough plastics site http://www.gough.com.au/4wd.htm

also says on there they will do custom work, big or small, just send them some cad plans or watever... that sounds pretty sweet

Post by **V8Diesel** » Mon Dec 08, 2003 1:32 pm

The boxes made by Gough Plastics are well made and very good quality. I have been fitting these to mine vehicles for a few years now and they also make all of our bonnet's, door skins and mudguards for our vehicles. They have also done a bit of plastic fabrication work for us in the past but that type of work is expensive (time consuming). I reccommend their products. Ask for Ian or Simon.

Post by **fatassgq** » Mon Dec 08, 2003 2:30 pm

Yeah I want to use one of those 'tuff boxes' and mount it in the back of my tray on the chassis so the lid is the same level as the floor and the weight is kept a little lower. The only thing that sux is that the locking strap things are on the side not the top. Makes it hard to have everything tucked in nice and tight. I like the look of the diamond t products also but these would obviously be heavier than the plastic ones.
I might even try and incorporate a plastic water tank somewhere evetually cause it is always good to have a bit of water on tap.
wonder if they could handle me old mate Jim B....

Post by **hypo** » Mon Dec 08, 2003 8:04 pm

fatass75 wrote:Yeah I want to use one of those 'tuff boxes' and mount it in the back of my tray on the chassis so the lid is the same level as the floor and the weight is kept a little lower. The only thing that sux is that the locking strap things are on the side not the top. Makes it hard to have everything tucked in nice and tight. I like the look of the diamond t products also but these would obviously be heavier than the plastic ones.
I might even try and incorporate a plastic water tank somewhere evetually cause it is always good to have a bit of water on tap.
wonder if they could handle me old mate Jim B....

the one i seen at woodpecker had the latches on the top and thats wot im after also but i couldnt c a brand or anything on it other then the toughdog sticker and me being a dummy didnt ask any1 either :roll:

Outer Limits 4x4 Board

storage containers

storage containers

Who is online