I noticed on the way to mackay today the volt meter dropped to halfway. On the multimeter was outputting 13.5V but should be around 14 I think. I know a week earlier went thru (but not stuck) in some muddy water. I took it to car lovers tonight here in mackay and hosed the alternator out and seems ok now pumping out 14.2V. If I recall it did this before and it fixed it but what exactly? Would inside would have been affected by the dirty water to then work with a clean out it would be handy to know. Regulator maybe?
Any help appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series alternator low voltage output
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 1 guest