turbo oil feed on a 2h

[mudpog]

ive just got a turbo rebuilt and am goin to put it on ,it used to be on this motor 3yr ago ,but it blew and havent got around to rebuilding it,the old oil feed line is only short ,long enough to make the alternator oil feed ,im guessing cause i carnt remeber where it was originaly,
is it ok to run the oil feed to a turbo, from the oil feed to the alternator on a 2h or is it better going over the top to the oil pressure sender??
the turbo has no waste gate and is a older garret aireaserch turbo if that helps at all

[xenith]

t into alt ok mate

[bigbrowndog]

Cheers I run the oil feed off my vacuum pump feed line to my T3 and it has been fine for about 2 years now no problems .

[sixdeetoo]

Here's mine

http://i36.photobucket.com/albums/e8/Si ... ilfeed.jpg

still works; mines intercooled though.

Bran

[mudpog]

thanks fellas its all done now ,so all i gotta do is sort the exhaust and mount a pyro ,wat sort of temps should it be running after turbo ??
sixdeetoo does the intercooler make much difference??