Page 1 of 1
International Scouts
Posted: Thu May 17, 2007 3:28 pm
by sharon40
Hi there
Would anyone have an idea what other carby can be bolted to a 392 inter motor
I am trying to do away with the covener
thanks
Sharon
Posted: Fri May 18, 2007 9:37 pm
by OzBinder
My old 345 motor had a holley 600 or 650 but not sure which one, i went efi about 5 years ago so a bit hard to remember, i don't remember it having an adapter, but again not sure, but it was a holley
Hope that might help a little. also look up
http://www.binderbulletin.org/ & do a search or get in touch with the VIC or QLD International Scout club.
Posted: Tue May 22, 2007 8:27 pm
by 360 scout
Hey sharon I'd recommend either a carter afb or edelbrock both carbs are the same design , I could never get decent economy out of a holley also the carters will run on a lot steeper angle than a holley .
Posted: Wed May 30, 2007 8:13 pm
by scout392
Agree Cater carb.
Eric
Posted: Sat Mar 01, 2008 4:30 pm
by 302 cruiser
go with a holley if you are running gas the carter and edelbrock dont work aswell with gas and if it happens to backfire on gas a edelbrock or carter will need rebuild holley wont