Hi there
Would anyone have an idea what other carby can be bolted to a 392 inter motor
I am trying to do away with the covener
thanks
Sharon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
International Scouts
Moderator: Tiny
My old 345 motor had a holley 600 or 650 but not sure which one, i went efi about 5 years ago so a bit hard to remember, i don't remember it having an adapter, but again not sure, but it was a holley
Hope that might help a little. also look up http://www.binderbulletin.org/ & do a search or get in touch with the VIC or QLD International Scout club.
Hope that might help a little. also look up http://www.binderbulletin.org/ & do a search or get in touch with the VIC or QLD International Scout club.
Inter Scouts.... Built Tuff!!
Rock///Art Customs
Rock///Art Customs
Hey sharon I'd recommend either a carter afb or edelbrock both carbs are the same design , I could never get decent economy out of a holley also the carters will run on a lot steeper angle than a holley .
TOYOTAS ARE LIKE TAMPONS!! every pussie has one!
Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Who is online
Users browsing this forum: No registered users and 2 guests