Outer Limits 4x4 Board

I was wondering if anybody has any experiences with fitting Dobinsons shocks to their vehicles, particularly Defenders.

I am about to replace the springs and shocks on my 2003 Defender 90 and I think that I have the springs all sorted at the moment. I am going with Kings Springs front and rear which should give me around a 40mm lift.

I haven’t decided on which shocks to use yet though hence this question. I was leaning towards Bilstein shocks but I think that they may be a little too firm for the 90. I know that I can get them re-valved to the comfort setting but I really can’t justify the extra expense after paying over $700 for the shocks in the first place.

So now I’m looking at the Dobinsons shocks which retail for around $440 for all four. I have heard that these are also valved quite firmly but haven’t heard all that much about them, so any advice, opinions or experiences with these shocks would be very much appreciated.

Cheers
MOS

I fitted the Dobinsions Shocks and springs to my Pajero mate about a year ago and i rate them very highly, For the price i could not find any shock better and there still as good as when i installed them.

i just installed there springs on my Rangie and it holds weight and flex's very well.

hope this helps

had the springs and shocks on an 89 rangie and couldnt fault it. I used to have OME but the dobbinsons are far better and cheaper too