Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What springs?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 41
Joined: Thu Oct 12, 2006 9:30 pm
Location: Perth Hills

What springs?

Post by Merv »

I want some new springs, 40-50mm lift for a classic range rover.

Front has a heavy steel bar and winch

Rear is standard weight aside from removal of interior

I will be running 11 travel inch shocks (with modified mounts), haultech bushes in the front, modified (cranked) rear lower arms and a modified a-arm ball joint.

I would like opinions on which springs would work best for off road use, ie: articulation and control. Not really worried about on road use as it will be a trailer queen

Opinions on spring retainers or articulation cones would be welcomed too.

Thanks in advance
82 Rangie with lots of bits for comps
98 GU patrol with lots of bits for touring
Posts: 135
Joined: Sat Jan 11, 2003 4:20 pm
Location: NZ

Post by lowbox »

Get some long LRA springs http://www.lrautomotive.com.au/54.html - and retain the rear springs so it's not so tippy

if you drive fast you'll need a heavier spring than if you take it easy - so think it through. it's easy to get rangies to articulate the rear but less easy to get a balanced rig

I'd also get longer shocks and reposition the rear shock mounts



you can do a lot more but you get into drivetrain mods so if you dont want to do that listen carefully and see how other peoples rangies handle.
ct
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests