Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

some pics of my junk

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

some pics of my junk

Post by M&M Custom Engineerin »

one
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

two
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

three
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

four
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

hope you dont post this on pirate, they'd be up you about using besser blocks, or as the yanks call em, 'cinder blocks' to support the stands

anyway, looking good :D
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

its not heavy. two people can pick up the chassis fairly easy.

I will get some more pics with the engine in tomorrow.
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

So what are the specs going to be. Engine/gearbox/transfer/axles/body??

Sam
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

engine is going to be the mighty 3B with a turbo, stock gearbox and a set of gears for the tcase.
Axles will be rockwells 4 wheel steer, if they ever get here!!!! Full hydraulic steering. Coil overs. I will be running 20 inch rims and 14.00r20 michelins.

Links will be double A- frame front and rear. Same as what slinky uses in the rear. The bottom A-frame for the front and rear will mount up to the bolt in crossmember in the pic. Gearbox mount is also on the crossmember.

I have the lifted the engine and trans to give more clearance for front upper A-frame and also gives a flat bottom. I want to run the chassis as low as i can as well.

Body will be just the cruiser firwall and bonnet and tube everything esle.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

cinder blocks wont matter here as it is so light antt
hands and mums dont count!!!
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

mickbj42 wrote:engine is going to be the mighty 3B with a turbo, stock gearbox and a set of gears for the tcase.
Axles will be rockwells 4 wheel steer, if they ever get here!!!! Full hydraulic steering. Coil overs. I will be running 20 inch rims and 14.00r20 michelins.

Links will be double A- frame front and rear. Same as what slinky uses in the rear. The bottom A-frame for the front and rear will mount up to the bolt in crossmember in the pic. Gearbox mount is also on the crossmember.

I have the lifted the engine and trans to give more clearance for front upper A-frame and also gives a flat bottom. I want to run the chassis as low as i can as well.

Body will be just the cruiser firwall and bonnet and tube everything esle.




That will be no good for offroad, sounds like a pile of junk to me...



















why???


















It isnt all bolt on :finger: :finger: :finger:
:P :D :roll: :roll:


NICK
TECH SCREW GURU
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

the cross member is :finger:

I want to make a kit so others can do it. :finger:
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

how much shorter is the chassis?

what wheel base?



NICK
TECH SCREW GURU
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

the chassis is cut off at the rear t/case output.

I am going put the wheel base at about 105-110.

Just an aside.... What is the wheelbase of a coil cab nissan patrol?
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i think the nissan is 108 and the wagons are 112, but im not 100% on that.
TECH SCREW GURU
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Coil cab Nissan are 118 the same as a LWB.
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

thanks.

I want to keep mine shorter than the lwb patrols and 80 series, but longer than a shorty
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i was going to say that but it didnt sound right, now that i think about it some more Ruff was 118 and i remember him and BJ have the nissan wheel base discussion about the steps and how it was a wheel base thing.



NICK
TECH SCREW GURU
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

For the records, SWB 96.
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

I was going to ask what you are going to do for brakes but I guess you will run the stock drums with the 20in wheels??

Sam
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Sounds like its going to be a weapon!

How much did you pay for the Rockwells :?:
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

brakes. i am going to run wheel discs. I will run the hubs flipped out but with heaps of backspace, about 8 inch or so on a 10 inch rim.
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

ok a few more pics
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

another
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

another
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

and another
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

So you are running tube from there back??

What wheel base you thinking of running??

Sam
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

yeah tube from there back. only a loop back to hang the coil overs from and with some stays coming back from the rear main hoop of the cage to support it.

Wheelbase, around 105-110 inches.

i am just dropping the body on it at the moment, just up for a quick feed!

I will post some pics with the body on later.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

lookin good mick :D

cmawn, i wanna see some bootie fab, so take some close up pics of your suspension, and i will ROFL at you!! :lol:
hands and mums dont count!!!
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i still dont like the idea of nothing bolting on.


But not it is easy to tell how short that thing is, and dam you have removed alot.


NICK
TECH SCREW GURU
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

nick,

the blue bar at the back is in about the middle of the seat.


Some more pics
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 107 guests