After that i reckon i am going to think about adding pedals and a bigger rubber band.
Puk
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Good zorst place SE QLD?
Good zorst place SE QLD?
Does anyone know of a good quality (but still reasonable cheap!) place to take the little 1.3l Maruti to get extractors and a 1.75" exhaust around Toowoomba, Gatton or Brisbane?
After that i reckon i am going to think about adding pedals and a bigger rubber band.
Puk
After that i reckon i am going to think about adding pedals and a bigger rubber band.
Puk
brssy exhausted
Right Price Exhausts (Moss Street, Springwood): 3808 9211 or
Lee's Exhausts (Moss Street, Springwood): 3808 7788
OR Jack Beedhams Redcliffe
ph: (07)32831000 or
Noiseworks.
Lee's Exhausts (Moss Street, Springwood): 3808 7788
OR Jack Beedhams Redcliffe
ph: (07)32831000 or
Noiseworks.
Wacol Muffler & Brake Shop
Ph: 3271 5044
Unit 1, Cnr Progress Rd & Inductrial Ave Wacol, QLD, 4076.
This bloke did my Sierra, and Dad's (Both 1.3 SWB). Very happy with results, we got extractors and 2 inch system for around $400-$450 (I cant exactly remember). Dad had to pay more though because his cat was dead, and had to buy a new one, my old one was 'recycled'. His extractors are made by someone he knows (not brandname), but they are great. With my fathers Sierra (still on 26's) the acceleration is excelent for an otherwise standard 1300. Economy improved by about an extra 1/2 km per litre of fuel for both cars.
Ph: 3271 5044
Unit 1, Cnr Progress Rd & Inductrial Ave Wacol, QLD, 4076.
This bloke did my Sierra, and Dad's (Both 1.3 SWB). Very happy with results, we got extractors and 2 inch system for around $400-$450 (I cant exactly remember). Dad had to pay more though because his cat was dead, and had to buy a new one, my old one was 'recycled'. His extractors are made by someone he knows (not brandname), but they are great. With my fathers Sierra (still on 26's) the acceleration is excelent for an otherwise standard 1300. Economy improved by about an extra 1/2 km per litre of fuel for both cars.
Wheeling on completely wicked angles, without even looking stable.
Who is online
Users browsing this forum: No registered users and 2 guests