Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

36" tyres without going SOA?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

36" tyres without going SOA?

Post by Nev62 »

Is it possible to fit 35" or 36" tyres to a 60 series without going SOA?

What would need to be done?
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Posts: 34
Joined: Wed Jan 17, 2007 7:51 pm
Location: Cairns

Post by cruiserute75 »

yes, there are a few blokes on here who are running 36" pedes.
id say 2 inch suspension, 2 inch body lift should clear 35's. might have a little bit of scrubbing. ive never done it personally but there are a heap of people who have done and are happy with it. try a search for more info.

mick
Posts: 1151
Joined: Sat Jul 23, 2005 1:48 pm
Location: Does lost count?

Post by midnight »

Ive got 32's on sagged stock suspension, no other lift, and I have zero scrubbing, so with the mentioned 2" body and spring lifts, 35's should fit.
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

ya can buy 4 inch springs from playtime 4x4 in sunbury, and of set rims. and they think they wont rub and will clear 35s. am told this is the set up hobzee runs(bloke that helped start pro comp 4wd) and i know of a fella that goes buy the name mouse with a lgreen 60 that runs them aswell. i was going to get them for my 60, but had to turf the truck.

Alistair
Go Hard Or GO Home
Posts: 18
Joined: Wed Jun 15, 2005 7:43 pm
Location: Victoria

Post by fj60efi_ »

I run 35's on my 60 with standard 2" spring lift (no body lift), a little spacing on the bump stops and a fair bit of guard cutting. Looks good, drives well and leaves most bits factory. Upgraded the brakes and gears to suit also. A little more offset on the wheels helps.
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Post by Nev62 »

fj60efi_ wrote:I run 35's on my 60 with standard 2" spring lift (no body lift), a little spacing on the bump stops and a fair bit of guard cutting. Looks good, drives well and leaves most bits factory. Upgraded the brakes and gears to suit also. A little more offset on the wheels helps.
Pics? How did you modify the brakes?
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Posts: 18
Joined: Wed Jun 15, 2005 7:43 pm
Location: Victoria

Post by fj60efi_ »

I've sent some pics to someone recently - I'll try to find them again, pm me yor email address.
Brakes - do a search... V6 4runner calipers, 78series pads(?? I think - would have to confirm) with a little bit grinded off and slotted rotors. Pulls up great now! And just make sure the rear drums are in good working order. They have a massive surface area so as long as they aren't full of mud/water they stop fine.
edit: forgot to say - also used the early 80 series 1"bore master and booster. bolt pattern was the same - bolted right up to the firewall in the same spot. Pedal feels great!
Posts: 58
Joined: Sun Jun 10, 2007 5:06 am

Post by krf_bb »

go big lifts on cab
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests