Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

One way valve for Brake & Clutch booster (turbo fitment)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

One way valve for Brake & Clutch booster (turbo fitment)

Post by raptorthumper »

I need to fit a oneway valve to my clutch and brake booster, after i turboed my GU 4.5. (On boost the clutch pushes back at me)

Anyone know what i should get. Asked Nissan parts for one off a TD42T but the bloke was hopeless and couldn't find it.

Grant.
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

I dont think a TD42 would have one they run a vacuum pump for they brakes
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

My thinking aswell... perhaps the ZD30, but not the TD42.

Could you not use a check valve from an air compressor setup, $25 off ebay from hobzee?
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

A good brake place will supply one for sure. I got one from Better Brakes in Bayswater, although that is obviously not really close to you.
This is not legal advice.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

td42 have them on lh front gaurd they also have a vac tank which is y they have a check valve to stop the vac bleeding back through the pump
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests