Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RD28 EGR Valve

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 71
Joined: Thu Jan 13, 2005 12:38 pm
Location: Brisbane

RD28 EGR Valve

Post by HARMZ »

Blocked off the EGR Valve on the weekend, thought I'd share the plate dimensions with you all.

Simple to do, have gasket already glued to both sids of EGR plate, remove intercooler pipes (flat blade screwdriver), loosen off valve nuts (12mm spanner), lever valve enough for plate to slip down (flat blade screwdriver) apply sealant to EGR plate, slip in, tighten up, put intercooler pipes back on.

Did it make a difference??? barely.


Image

Image
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest